{"title":"Level 2 Quick Mount Holsters","description":null,"products":[{"product_id":"alpha-foxtrot-romulus-4-25-comp-tlr1-hlx-level-2-tactical-quick-mount-holster","title":"Alpha Foxtrot Romulus 4.25'' Comp w\/ Streamlight TLR-1 HLX Level 2 Tactical Quick Mount Holster","description":"\u003cp\u003eBuilt for shooters who move. This is the 0.093'' Level II Tactical shell on our Quick Mount belt attachment. The holster rides on your belt and comes off the attachment with the push of a button, no tools needed.\u003c\/p\u003e\u003cp\u003eRetention is a spring-loaded Level II hood. Press the button on the side of the hood and it travels forward, clear of the slide, and the pistol comes straight up. It resets on the reholster. The button sits under your thumb, not your trigger finger.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThicker shell, set once\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe shell is 0.093'' Kydex, a full gauge step up from the 0.080'' most holsters are cut from. It holds its shape better under a hard draw.\u003c\/p\u003e\u003cp\u003eThe retention hardware is riveted, not screwed. Retention is set at the bench and it stays there. Nothing to back out on a stage, nothing to lose in the bottom of a range bag. Retention is not adjustable on this build, which is the point: it is set once and it does not move.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQuick Mount attachment\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe belt attachment is machined from anodized aluminum and comes in black. It fits 1.5'' belts.\u003c\/p\u003e\u003cp\u003ePush the Quick Mount release button to take the holster off the attachment. The attachment stays on your belt, so the holster comes off and goes back on without taking your belt off.\u003c\/p\u003e\u003cp\u003eThe holster body is riveted, so there is nothing on it to loosen. Check that the belt attachment hardware is tight before you run it hard.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it's legal\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eUSPSA Multigun rules allow a holster on a belt worn at waist level, and rule 5.2.1.3.1 requires it to retain the pistol during the vigorous movement that may be required during the courses of fire. That is what the Level II hood is for. The Tactical Games allows hip-level holsters, and bans appendix, small of back, fanny pack, and shoulder rigs.\u003c\/p\u003e\u003cp\u003eUSPSA and IDPA pistol matches are stricter. Both limit how far the holster can sit out from your belt or body, and USPSA sets that limit by division. Measure your setup against the rulebook for the match and division you shoot before gear check.\u003c\/p\u003e\u003cp\u003eThe open, tapered muzzle clears threaded barrels and compensators. Cut to accept slide-mounted optics and suppressor height sights.\u003c\/p\u003e\u003cp\u003eRight-hand draw. Holster shell in Black or Carbon Fiber, Quick Mount attachment in black. Lifetime warranty against cracks and defects. Free US shipping, same-day dispatch on orders placed before 2 PM EST.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCompatible Model(s):\u003c\/strong\u003e\u003cspan\u003e Alpha Foxtrot Romulus 4.25'' Comp with the Streamlight TLR-1 HLX\u003c\/span\u003e\u003c\/p\u003e","brand":"Black Scorpion Outdoor Gear","offers":[{"title":"Right-Hand Draw \/ Black","offer_id":45331148800043,"sku":"HC36-QMBK-ROMULUS4TLR1","price":174.99,"currency_code":"USD","in_stock":true},{"title":"Right-Hand Draw \/ Carbon Fiber","offer_id":45331148832811,"sku":"HC36-QMCF-ROMULUS4TLR1","price":179.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0122\/5696\/8763\/files\/BSG_Level_II_New_Strap_QMH_1.jpg?v=1789137812"},{"product_id":"beretta-94x-performance-tlr1-hlx-level-2-tactical-quick-mount-holster","title":"Beretta 94X Performance w\/ Streamlight TLR-1 HLX Level 2 Tactical Quick Mount Holster","description":"\u003cp\u003eBuilt for shooters who move. This is the 0.093'' Level II Tactical shell on our Quick Mount belt attachment. The holster rides on your belt and comes off the attachment with the push of a button, no tools needed.\u003c\/p\u003e\u003cp\u003eRetention is a spring-loaded Level II hood. Press the button on the side of the hood and it travels forward, clear of the slide, and the pistol comes straight up. It resets on the reholster. The button sits under your thumb, not your trigger finger.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThicker shell, set once\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe shell is 0.093'' Kydex, a full gauge step up from the 0.080'' most holsters are cut from. It holds its shape better under a hard draw.\u003c\/p\u003e\u003cp\u003eThe retention hardware is riveted, not screwed. Retention is set at the bench and it stays there. Nothing to back out on a stage, nothing to lose in the bottom of a range bag. Retention is not adjustable on this build, which is the point: it is set once and it does not move.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQuick Mount attachment\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe belt attachment is machined from anodized aluminum and comes in black. It fits 1.5'' belts.\u003c\/p\u003e\u003cp\u003ePush the Quick Mount release button to take the holster off the attachment. The attachment stays on your belt, so the holster comes off and goes back on without taking your belt off.\u003c\/p\u003e\u003cp\u003eThe holster body is riveted, so there is nothing on it to loosen. Check that the belt attachment hardware is tight before you run it hard.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it's legal\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eUSPSA Multigun rules allow a holster on a belt worn at waist level, and rule 5.2.1.3.1 requires it to retain the pistol during the vigorous movement that may be required during the courses of fire. That is what the Level II hood is for. The Tactical Games allows hip-level holsters, and bans appendix, small of back, fanny pack, and shoulder rigs.\u003c\/p\u003e\u003cp\u003eUSPSA and IDPA pistol matches are stricter. Both limit how far the holster can sit out from your belt or body, and USPSA sets that limit by division. Measure your setup against the rulebook for the match and division you shoot before gear check.\u003c\/p\u003e\u003cp\u003eThe open, tapered muzzle clears threaded barrels and compensators. Cut to accept slide-mounted optics and suppressor height sights.\u003c\/p\u003e\u003cp\u003eRight-hand draw. Holster shell in Black or Carbon Fiber, Quick Mount attachment in black. Lifetime warranty against cracks and defects. Free US shipping, same-day dispatch on orders placed before 2 PM EST.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCompatible Model(s):\u003c\/strong\u003e\u003cspan\u003e Beretta 94X Performance with the Streamlight TLR-1 HLX\u003c\/span\u003e\u003c\/p\u003e","brand":"Black Scorpion Outdoor Gear","offers":[{"title":"Right-Hand Draw \/ Black","offer_id":45331149652011,"sku":"HC36-QMBK-94XPERFTLR1","price":174.99,"currency_code":"USD","in_stock":true},{"title":"Right-Hand Draw \/ Carbon Fiber","offer_id":45331149684779,"sku":"HC36-QMCF-94XPERFTLR1","price":179.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0122\/5696\/8763\/files\/BSG_Level_II_New_Strap_QMH_1.jpg?v=1789137812"},{"product_id":"bersa-m2xi-tlr1-hlx-level-2-tactical-quick-mount-holster","title":"Bersa M2XI w\/ Streamlight TLR-1 HLX Level 2 Tactical Quick Mount Holster","description":"\u003cp\u003eBuilt for shooters who move. This is the 0.093'' Level II Tactical shell on our Quick Mount belt attachment. The holster rides on your belt and comes off the attachment with the push of a button, no tools needed.\u003c\/p\u003e\u003cp\u003eRetention is a spring-loaded Level II hood. Press the button on the side of the hood and it travels forward, clear of the slide, and the pistol comes straight up. It resets on the reholster. The button sits under your thumb, not your trigger finger.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThicker shell, set once\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe shell is 0.093'' Kydex, a full gauge step up from the 0.080'' most holsters are cut from. It holds its shape better under a hard draw.\u003c\/p\u003e\u003cp\u003eThe retention hardware is riveted, not screwed. Retention is set at the bench and it stays there. Nothing to back out on a stage, nothing to lose in the bottom of a range bag. Retention is not adjustable on this build, which is the point: it is set once and it does not move.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQuick Mount attachment\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe belt attachment is machined from anodized aluminum and comes in black. It fits 1.5'' belts.\u003c\/p\u003e\u003cp\u003ePush the Quick Mount release button to take the holster off the attachment. The attachment stays on your belt, so the holster comes off and goes back on without taking your belt off.\u003c\/p\u003e\u003cp\u003eThe holster body is riveted, so there is nothing on it to loosen. Check that the belt attachment hardware is tight before you run it hard.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it's legal\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eUSPSA Multigun rules allow a holster on a belt worn at waist level, and rule 5.2.1.3.1 requires it to retain the pistol during the vigorous movement that may be required during the courses of fire. That is what the Level II hood is for. The Tactical Games allows hip-level holsters, and bans appendix, small of back, fanny pack, and shoulder rigs.\u003c\/p\u003e\u003cp\u003eUSPSA and IDPA pistol matches are stricter. Both limit how far the holster can sit out from your belt or body, and USPSA sets that limit by division. Measure your setup against the rulebook for the match and division you shoot before gear check.\u003c\/p\u003e\u003cp\u003eThe open, tapered muzzle clears threaded barrels and compensators. Cut to accept slide-mounted optics and suppressor height sights.\u003c\/p\u003e\u003cp\u003eRight-hand draw. Holster shell in Black or Carbon Fiber, Quick Mount attachment in black. Lifetime warranty against cracks and defects. Free US shipping, same-day dispatch on orders placed before 2 PM EST.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCompatible Model(s):\u003c\/strong\u003e\u003cspan\u003e Bersa M2XI with the Streamlight TLR-1 HLX\u003c\/span\u003e\u003c\/p\u003e","brand":"Black Scorpion Outdoor Gear","offers":[{"title":"Right-Hand Draw \/ Black","offer_id":45331149717547,"sku":"HC36-QMBK-M2XITLR1","price":174.99,"currency_code":"USD","in_stock":true},{"title":"Right-Hand Draw \/ Carbon Fiber","offer_id":45331149750315,"sku":"HC36-QMCF-M2XITLR1","price":179.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0122\/5696\/8763\/files\/BSG_Level_II_New_Strap_QMH_1.jpg?v=1789137812"},{"product_id":"canik-tp9sfx-tlr1-hlx-level-2-tactical-quick-mount-holster","title":"Canik TP9SFX w\/ Streamlight TLR-1 HLX Level 2 Tactical Quick Mount Holster","description":"\u003cp\u003eBuilt for shooters who move. This is the 0.093'' Level II Tactical shell on our Quick Mount belt attachment. The holster rides on your belt and comes off the attachment with the push of a button, no tools needed.\u003c\/p\u003e\u003cp\u003eRetention is a spring-loaded Level II hood. Press the button on the side of the hood and it travels forward, clear of the slide, and the pistol comes straight up. It resets on the reholster. The button sits under your thumb, not your trigger finger.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThicker shell, set once\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe shell is 0.093'' Kydex, a full gauge step up from the 0.080'' most holsters are cut from. It holds its shape better under a hard draw.\u003c\/p\u003e\u003cp\u003eThe retention hardware is riveted, not screwed. Retention is set at the bench and it stays there. Nothing to back out on a stage, nothing to lose in the bottom of a range bag. Retention is not adjustable on this build, which is the point: it is set once and it does not move.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQuick Mount attachment\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe belt attachment is machined from anodized aluminum and comes in black. It fits 1.5'' belts.\u003c\/p\u003e\u003cp\u003ePush the Quick Mount release button to take the holster off the attachment. The attachment stays on your belt, so the holster comes off and goes back on without taking your belt off.\u003c\/p\u003e\u003cp\u003eThe holster body is riveted, so there is nothing on it to loosen. Check that the belt attachment hardware is tight before you run it hard.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it's legal\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eUSPSA Multigun rules allow a holster on a belt worn at waist level, and rule 5.2.1.3.1 requires it to retain the pistol during the vigorous movement that may be required during the courses of fire. That is what the Level II hood is for. The Tactical Games allows hip-level holsters, and bans appendix, small of back, fanny pack, and shoulder rigs.\u003c\/p\u003e\u003cp\u003eUSPSA and IDPA pistol matches are stricter. Both limit how far the holster can sit out from your belt or body, and USPSA sets that limit by division. Measure your setup against the rulebook for the match and division you shoot before gear check.\u003c\/p\u003e\u003cp\u003eThe open, tapered muzzle clears threaded barrels and compensators. Cut to accept slide-mounted optics and suppressor height sights.\u003c\/p\u003e\u003cp\u003eRight-hand draw. Holster shell in Black or Carbon Fiber, Quick Mount attachment in black. Lifetime warranty against cracks and defects. Free US shipping, same-day dispatch on orders placed before 2 PM EST.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCompatible Model(s):\u003c\/strong\u003e\u003cspan\u003e Canik TP9SFX with the Streamlight TLR-1 HLX\u003c\/span\u003e\u003c\/p\u003e","brand":"Black Scorpion Outdoor Gear","offers":[{"title":"Right-Hand Draw \/ Black","offer_id":45331149783083,"sku":"HC36-QMBK-TP9SFXTLR1","price":174.99,"currency_code":"USD","in_stock":true},{"title":"Right-Hand Draw \/ Carbon Fiber","offer_id":45331149815851,"sku":"HC36-QMCF-TP9SFXTLR1","price":179.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0122\/5696\/8763\/files\/BSG_Level_II_New_Strap_QMH_1.jpg?v=1789137812"},{"product_id":"canik-tti-combat-tlr1-hlx-level-2-tactical-quick-mount-holster","title":"Canik TTI Combat w\/ Streamlight TLR-1 HLX Level 2 Tactical Quick Mount Holster","description":"\u003cp\u003eBuilt for shooters who move. This is the 0.093'' Level II Tactical shell on our Quick Mount belt attachment. The holster rides on your belt and comes off the attachment with the push of a button, no tools needed.\u003c\/p\u003e\u003cp\u003eRetention is a spring-loaded Level II hood. Press the button on the side of the hood and it travels forward, clear of the slide, and the pistol comes straight up. It resets on the reholster. The button sits under your thumb, not your trigger finger.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThicker shell, set once\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe shell is 0.093'' Kydex, a full gauge step up from the 0.080'' most holsters are cut from. It holds its shape better under a hard draw.\u003c\/p\u003e\u003cp\u003eThe retention hardware is riveted, not screwed. Retention is set at the bench and it stays there. Nothing to back out on a stage, nothing to lose in the bottom of a range bag. Retention is not adjustable on this build, which is the point: it is set once and it does not move.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQuick Mount attachment\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe belt attachment is machined from anodized aluminum and comes in black. It fits 1.5'' belts.\u003c\/p\u003e\u003cp\u003ePush the Quick Mount release button to take the holster off the attachment. The attachment stays on your belt, so the holster comes off and goes back on without taking your belt off.\u003c\/p\u003e\u003cp\u003eThe holster body is riveted, so there is nothing on it to loosen. Check that the belt attachment hardware is tight before you run it hard.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it's legal\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eUSPSA Multigun rules allow a holster on a belt worn at waist level, and rule 5.2.1.3.1 requires it to retain the pistol during the vigorous movement that may be required during the courses of fire. That is what the Level II hood is for. The Tactical Games allows hip-level holsters, and bans appendix, small of back, fanny pack, and shoulder rigs.\u003c\/p\u003e\u003cp\u003eUSPSA and IDPA pistol matches are stricter. Both limit how far the holster can sit out from your belt or body, and USPSA sets that limit by division. Measure your setup against the rulebook for the match and division you shoot before gear check.\u003c\/p\u003e\u003cp\u003eThe open, tapered muzzle clears threaded barrels and compensators. Cut to accept slide-mounted optics and suppressor height sights.\u003c\/p\u003e\u003cp\u003eRight-hand draw. Holster shell in Black or Carbon Fiber, Quick Mount attachment in black. Lifetime warranty against cracks and defects. Free US shipping, same-day dispatch on orders placed before 2 PM EST.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCompatible Model(s):\u003c\/strong\u003e\u003cspan\u003e Canik TTI Combat with the Streamlight TLR-1 HLX\u003c\/span\u003e\u003c\/p\u003e","brand":"Black Scorpion Outdoor Gear","offers":[{"title":"Right-Hand Draw \/ Black","offer_id":45331149848619,"sku":"HC36-QMBK-TTITLR1","price":174.99,"currency_code":"USD","in_stock":true},{"title":"Right-Hand Draw \/ Carbon Fiber","offer_id":45331149881387,"sku":"HC36-QMCF-TTITLR1","price":179.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0122\/5696\/8763\/files\/BSG_Level_II_New_Strap_QMH_1.jpg?v=1789137812"},{"product_id":"cz-p-09-c-tlr1-hlx-level-2-tactical-quick-mount-holster","title":"CZ P-09 C w\/ Streamlight TLR-1 HLX Level 2 Tactical Quick Mount Holster","description":"\u003cp\u003eBuilt for shooters who move. This is the 0.093'' Level II Tactical shell on our Quick Mount belt attachment. The holster rides on your belt and comes off the attachment with the push of a button, no tools needed.\u003c\/p\u003e\u003cp\u003eRetention is a spring-loaded Level II hood. Press the button on the side of the hood and it travels forward, clear of the slide, and the pistol comes straight up. It resets on the reholster. The button sits under your thumb, not your trigger finger.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThicker shell, set once\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe shell is 0.093'' Kydex, a full gauge step up from the 0.080'' most holsters are cut from. It holds its shape better under a hard draw.\u003c\/p\u003e\u003cp\u003eThe retention hardware is riveted, not screwed. Retention is set at the bench and it stays there. Nothing to back out on a stage, nothing to lose in the bottom of a range bag. Retention is not adjustable on this build, which is the point: it is set once and it does not move.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQuick Mount attachment\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe belt attachment is machined from anodized aluminum and comes in black. It fits 1.5'' belts.\u003c\/p\u003e\u003cp\u003ePush the Quick Mount release button to take the holster off the attachment. The attachment stays on your belt, so the holster comes off and goes back on without taking your belt off.\u003c\/p\u003e\u003cp\u003eThe holster body is riveted, so there is nothing on it to loosen. Check that the belt attachment hardware is tight before you run it hard.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it's legal\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eUSPSA Multigun rules allow a holster on a belt worn at waist level, and rule 5.2.1.3.1 requires it to retain the pistol during the vigorous movement that may be required during the courses of fire. That is what the Level II hood is for. The Tactical Games allows hip-level holsters, and bans appendix, small of back, fanny pack, and shoulder rigs.\u003c\/p\u003e\u003cp\u003eUSPSA and IDPA pistol matches are stricter. Both limit how far the holster can sit out from your belt or body, and USPSA sets that limit by division. Measure your setup against the rulebook for the match and division you shoot before gear check.\u003c\/p\u003e\u003cp\u003eThe open, tapered muzzle clears threaded barrels and compensators. Cut to accept slide-mounted optics and suppressor height sights.\u003c\/p\u003e\u003cp\u003eRight-hand draw. Holster shell in Black or Carbon Fiber, Quick Mount attachment in black. Lifetime warranty against cracks and defects. Free US shipping, same-day dispatch on orders placed before 2 PM EST.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCompatible Model(s):\u003c\/strong\u003e\u003cspan\u003e CZ P-09 C with the Streamlight TLR-1 HLX\u003c\/span\u003e\u003c\/p\u003e","brand":"Black Scorpion Outdoor Gear","offers":[{"title":"Right-Hand Draw \/ Black","offer_id":45331149914155,"sku":"HC36-QMBK-P09CTLR1","price":174.99,"currency_code":"USD","in_stock":true},{"title":"Right-Hand Draw \/ Carbon Fiber","offer_id":45331149946923,"sku":"HC36-QMCF-P09CTLR1","price":179.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0122\/5696\/8763\/files\/BSG_Level_II_New_Strap_QMH_1.jpg?v=1789137812"},{"product_id":"cz-p-10-c-tlr1-hlx-level-2-tactical-quick-mount-holster","title":"CZ P-10 C w\/ Streamlight TLR-1 HLX Level 2 Tactical Quick Mount Holster","description":"\u003cp\u003eBuilt for shooters who move. This is the 0.093'' Level II Tactical shell on our Quick Mount belt attachment. The holster rides on your belt and comes off the attachment with the push of a button, no tools needed.\u003c\/p\u003e\u003cp\u003eRetention is a spring-loaded Level II hood. Press the button on the side of the hood and it travels forward, clear of the slide, and the pistol comes straight up. It resets on the reholster. The button sits under your thumb, not your trigger finger.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThicker shell, set once\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe shell is 0.093'' Kydex, a full gauge step up from the 0.080'' most holsters are cut from. It holds its shape better under a hard draw.\u003c\/p\u003e\u003cp\u003eThe retention hardware is riveted, not screwed. Retention is set at the bench and it stays there. Nothing to back out on a stage, nothing to lose in the bottom of a range bag. Retention is not adjustable on this build, which is the point: it is set once and it does not move.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQuick Mount attachment\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe belt attachment is machined from anodized aluminum and comes in black. It fits 1.5'' belts.\u003c\/p\u003e\u003cp\u003ePush the Quick Mount release button to take the holster off the attachment. The attachment stays on your belt, so the holster comes off and goes back on without taking your belt off.\u003c\/p\u003e\u003cp\u003eThe holster body is riveted, so there is nothing on it to loosen. Check that the belt attachment hardware is tight before you run it hard.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it's legal\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eUSPSA Multigun rules allow a holster on a belt worn at waist level, and rule 5.2.1.3.1 requires it to retain the pistol during the vigorous movement that may be required during the courses of fire. That is what the Level II hood is for. The Tactical Games allows hip-level holsters, and bans appendix, small of back, fanny pack, and shoulder rigs.\u003c\/p\u003e\u003cp\u003eUSPSA and IDPA pistol matches are stricter. Both limit how far the holster can sit out from your belt or body, and USPSA sets that limit by division. Measure your setup against the rulebook for the match and division you shoot before gear check.\u003c\/p\u003e\u003cp\u003eThe open, tapered muzzle clears threaded barrels and compensators. Cut to accept slide-mounted optics and suppressor height sights.\u003c\/p\u003e\u003cp\u003eRight-hand draw. Holster shell in Black or Carbon Fiber, Quick Mount attachment in black. Lifetime warranty against cracks and defects. Free US shipping, same-day dispatch on orders placed before 2 PM EST.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCompatible Model(s):\u003c\/strong\u003e\u003cspan\u003e CZ P-10 C with the Streamlight TLR-1 HLX\u003c\/span\u003e\u003c\/p\u003e","brand":"Black Scorpion Outdoor Gear","offers":[{"title":"Right-Hand Draw \/ Black","offer_id":45331150012459,"sku":"HC36-QMBK-P10CTLR1","price":174.99,"currency_code":"USD","in_stock":true},{"title":"Right-Hand Draw \/ Carbon Fiber","offer_id":45331150045227,"sku":"HC36-QMCF-P10CTLR1","price":179.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0122\/5696\/8763\/files\/BSG_Level_II_New_Strap_QMH_1.jpg?v=1789137812"},{"product_id":"cz-p-10-f-tlr1-hlx-level-2-tactical-quick-mount-holster","title":"CZ P-10 F w\/ Streamlight TLR-1 HLX Level 2 Tactical Quick Mount Holster","description":"\u003cp\u003eBuilt for shooters who move. This is the 0.093'' Level II Tactical shell on our Quick Mount belt attachment. The holster rides on your belt and comes off the attachment with the push of a button, no tools needed.\u003c\/p\u003e\u003cp\u003eRetention is a spring-loaded Level II hood. Press the button on the side of the hood and it travels forward, clear of the slide, and the pistol comes straight up. It resets on the reholster. The button sits under your thumb, not your trigger finger.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThicker shell, set once\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe shell is 0.093'' Kydex, a full gauge step up from the 0.080'' most holsters are cut from. It holds its shape better under a hard draw.\u003c\/p\u003e\u003cp\u003eThe retention hardware is riveted, not screwed. Retention is set at the bench and it stays there. Nothing to back out on a stage, nothing to lose in the bottom of a range bag. Retention is not adjustable on this build, which is the point: it is set once and it does not move.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQuick Mount attachment\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe belt attachment is machined from anodized aluminum and comes in black. It fits 1.5'' belts.\u003c\/p\u003e\u003cp\u003ePush the Quick Mount release button to take the holster off the attachment. The attachment stays on your belt, so the holster comes off and goes back on without taking your belt off.\u003c\/p\u003e\u003cp\u003eThe holster body is riveted, so there is nothing on it to loosen. Check that the belt attachment hardware is tight before you run it hard.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it's legal\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eUSPSA Multigun rules allow a holster on a belt worn at waist level, and rule 5.2.1.3.1 requires it to retain the pistol during the vigorous movement that may be required during the courses of fire. That is what the Level II hood is for. The Tactical Games allows hip-level holsters, and bans appendix, small of back, fanny pack, and shoulder rigs.\u003c\/p\u003e\u003cp\u003eUSPSA and IDPA pistol matches are stricter. Both limit how far the holster can sit out from your belt or body, and USPSA sets that limit by division. Measure your setup against the rulebook for the match and division you shoot before gear check.\u003c\/p\u003e\u003cp\u003eThe open, tapered muzzle clears threaded barrels and compensators. Cut to accept slide-mounted optics and suppressor height sights.\u003c\/p\u003e\u003cp\u003eRight-hand draw. Holster shell in Black or Carbon Fiber, Quick Mount attachment in black. Lifetime warranty against cracks and defects. Free US shipping, same-day dispatch on orders placed before 2 PM EST.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCompatible Model(s):\u003c\/strong\u003e\u003cspan\u003e CZ P-10 F with the Streamlight TLR-1 HLX\u003c\/span\u003e\u003c\/p\u003e","brand":"Black Scorpion Outdoor Gear","offers":[{"title":"Right-Hand Draw \/ Black","offer_id":45331150077995,"sku":"HC36-QMBK-P10FTLR1","price":174.99,"currency_code":"USD","in_stock":true},{"title":"Right-Hand Draw \/ Carbon Fiber","offer_id":45331150110763,"sku":"HC36-QMCF-P10FTLR1","price":179.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0122\/5696\/8763\/files\/BSG_Level_II_New_Strap_QMH_1.jpg?v=1789137812"},{"product_id":"cz-shadow-2-tlr1-hlx-level-2-tactical-quick-mount-holster","title":"CZ Shadow 2 w\/ Streamlight TLR-1 HLX Level 2 Tactical Quick Mount Holster","description":"\u003cp\u003eBuilt for shooters who move. This is the 0.093'' Level II Tactical shell on our Quick Mount belt attachment. The holster rides on your belt and comes off the attachment with the push of a button, no tools needed.\u003c\/p\u003e\u003cp\u003eRetention is a spring-loaded Level II hood. Press the button on the side of the hood and it travels forward, clear of the slide, and the pistol comes straight up. It resets on the reholster. The button sits under your thumb, not your trigger finger.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThicker shell, set once\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe shell is 0.093'' Kydex, a full gauge step up from the 0.080'' most holsters are cut from. It holds its shape better under a hard draw.\u003c\/p\u003e\u003cp\u003eThe retention hardware is riveted, not screwed. Retention is set at the bench and it stays there. Nothing to back out on a stage, nothing to lose in the bottom of a range bag. Retention is not adjustable on this build, which is the point: it is set once and it does not move.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQuick Mount attachment\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe belt attachment is machined from anodized aluminum and comes in black. It fits 1.5'' belts.\u003c\/p\u003e\u003cp\u003ePush the Quick Mount release button to take the holster off the attachment. The attachment stays on your belt, so the holster comes off and goes back on without taking your belt off.\u003c\/p\u003e\u003cp\u003eThe holster body is riveted, so there is nothing on it to loosen. Check that the belt attachment hardware is tight before you run it hard.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it's legal\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eUSPSA Multigun rules allow a holster on a belt worn at waist level, and rule 5.2.1.3.1 requires it to retain the pistol during the vigorous movement that may be required during the courses of fire. That is what the Level II hood is for. The Tactical Games allows hip-level holsters, and bans appendix, small of back, fanny pack, and shoulder rigs.\u003c\/p\u003e\u003cp\u003eUSPSA and IDPA pistol matches are stricter. Both limit how far the holster can sit out from your belt or body, and USPSA sets that limit by division. Measure your setup against the rulebook for the match and division you shoot before gear check.\u003c\/p\u003e\u003cp\u003eThe open, tapered muzzle clears threaded barrels and compensators. Cut to accept slide-mounted optics and suppressor height sights.\u003c\/p\u003e\u003cp\u003eRight-hand draw. Holster shell in Black or Carbon Fiber, Quick Mount attachment in black. Lifetime warranty against cracks and defects. Free US shipping, same-day dispatch on orders placed before 2 PM EST.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCompatible Model(s):\u003c\/strong\u003e\u003cspan\u003e CZ Shadow 2 with the Streamlight TLR-1 HLX\u003c\/span\u003e\u003c\/p\u003e","brand":"Black Scorpion Outdoor Gear","offers":[{"title":"Right-Hand Draw \/ Black","offer_id":45331150143531,"sku":"HC36-QMBK-SHADOW2TLR1","price":174.99,"currency_code":"USD","in_stock":true},{"title":"Right-Hand Draw \/ Carbon Fiber","offer_id":45331150176299,"sku":"HC36-QMCF-SHADOW2TLR1","price":179.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0122\/5696\/8763\/files\/BSG_Level_II_New_Strap_QMH_1.jpg?v=1789137812"},{"product_id":"fn-fnx-45-tactical-tlr1-hlx-level-2-tactical-quick-mount-holster","title":"FN FNX-45 Tactical w\/ Streamlight TLR-1 HLX Level 2 Tactical Quick Mount Holster","description":"\u003cp\u003eBuilt for shooters who move. This is the 0.093'' Level II Tactical shell on our Quick Mount belt attachment. The holster rides on your belt and comes off the attachment with the push of a button, no tools needed.\u003c\/p\u003e\u003cp\u003eRetention is a spring-loaded Level II hood. Press the button on the side of the hood and it travels forward, clear of the slide, and the pistol comes straight up. It resets on the reholster. The button sits under your thumb, not your trigger finger.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThicker shell, set once\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe shell is 0.093'' Kydex, a full gauge step up from the 0.080'' most holsters are cut from. It holds its shape better under a hard draw.\u003c\/p\u003e\u003cp\u003eThe retention hardware is riveted, not screwed. Retention is set at the bench and it stays there. Nothing to back out on a stage, nothing to lose in the bottom of a range bag. Retention is not adjustable on this build, which is the point: it is set once and it does not move.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQuick Mount attachment\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe belt attachment is machined from anodized aluminum and comes in black. It fits 1.5'' belts.\u003c\/p\u003e\u003cp\u003ePush the Quick Mount release button to take the holster off the attachment. The attachment stays on your belt, so the holster comes off and goes back on without taking your belt off.\u003c\/p\u003e\u003cp\u003eThe holster body is riveted, so there is nothing on it to loosen. Check that the belt attachment hardware is tight before you run it hard.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it's legal\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eUSPSA Multigun rules allow a holster on a belt worn at waist level, and rule 5.2.1.3.1 requires it to retain the pistol during the vigorous movement that may be required during the courses of fire. That is what the Level II hood is for. The Tactical Games allows hip-level holsters, and bans appendix, small of back, fanny pack, and shoulder rigs.\u003c\/p\u003e\u003cp\u003eUSPSA and IDPA pistol matches are stricter. Both limit how far the holster can sit out from your belt or body, and USPSA sets that limit by division. Measure your setup against the rulebook for the match and division you shoot before gear check.\u003c\/p\u003e\u003cp\u003eThe open, tapered muzzle clears threaded barrels and compensators. Cut to accept slide-mounted optics and suppressor height sights.\u003c\/p\u003e\u003cp\u003eRight-hand draw. Holster shell in Black or Carbon Fiber, Quick Mount attachment in black. Lifetime warranty against cracks and defects. Free US shipping, same-day dispatch on orders placed before 2 PM EST.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCompatible Model(s):\u003c\/strong\u003e\u003cspan\u003e FN FNX-45 Tactical with the Streamlight TLR-1 HLX\u003c\/span\u003e\u003c\/p\u003e","brand":"Black Scorpion Outdoor Gear","offers":[{"title":"Right-Hand Draw \/ Black","offer_id":45331150274603,"sku":"HC36-QMBK-FNX45TLR1","price":174.99,"currency_code":"USD","in_stock":true},{"title":"Right-Hand Draw \/ Carbon Fiber","offer_id":45331150307371,"sku":"HC36-QMCF-FNX45TLR1","price":179.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0122\/5696\/8763\/files\/BSG_Level_II_New_Strap_QMH_1.jpg?v=1789137812"},{"product_id":"fusion-firearms-xp-comp-tlr1-hlx-level-2-tactical-quick-mount-holster","title":"Fusion Firearms XP Comp w\/ Streamlight TLR-1 HLX Level 2 Tactical Quick Mount Holster","description":"\u003cp\u003eBuilt for shooters who move. This is the 0.093'' Level II Tactical shell on our Quick Mount belt attachment. The holster rides on your belt and comes off the attachment with the push of a button, no tools needed.\u003c\/p\u003e\u003cp\u003eRetention is a spring-loaded Level II hood. Press the button on the side of the hood and it travels forward, clear of the slide, and the pistol comes straight up. It resets on the reholster. The button sits under your thumb, not your trigger finger.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThicker shell, set once\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe shell is 0.093'' Kydex, a full gauge step up from the 0.080'' most holsters are cut from. It holds its shape better under a hard draw.\u003c\/p\u003e\u003cp\u003eThe retention hardware is riveted, not screwed. Retention is set at the bench and it stays there. Nothing to back out on a stage, nothing to lose in the bottom of a range bag. Retention is not adjustable on this build, which is the point: it is set once and it does not move.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQuick Mount attachment\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe belt attachment is machined from anodized aluminum and comes in black. It fits 1.5'' belts.\u003c\/p\u003e\u003cp\u003ePush the Quick Mount release button to take the holster off the attachment. The attachment stays on your belt, so the holster comes off and goes back on without taking your belt off.\u003c\/p\u003e\u003cp\u003eThe holster body is riveted, so there is nothing on it to loosen. Check that the belt attachment hardware is tight before you run it hard.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it's legal\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eUSPSA Multigun rules allow a holster on a belt worn at waist level, and rule 5.2.1.3.1 requires it to retain the pistol during the vigorous movement that may be required during the courses of fire. That is what the Level II hood is for. The Tactical Games allows hip-level holsters, and bans appendix, small of back, fanny pack, and shoulder rigs.\u003c\/p\u003e\u003cp\u003eUSPSA and IDPA pistol matches are stricter. Both limit how far the holster can sit out from your belt or body, and USPSA sets that limit by division. Measure your setup against the rulebook for the match and division you shoot before gear check.\u003c\/p\u003e\u003cp\u003eThe open, tapered muzzle clears threaded barrels and compensators. Cut to accept slide-mounted optics and suppressor height sights.\u003c\/p\u003e\u003cp\u003eRight-hand draw. Holster shell in Black or Carbon Fiber, Quick Mount attachment in black. Lifetime warranty against cracks and defects. Free US shipping, same-day dispatch on orders placed before 2 PM EST.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCompatible Model(s):\u003c\/strong\u003e\u003cspan\u003e Fusion Firearms XP Comp with the Streamlight TLR-1 HLX\u003c\/span\u003e\u003c\/p\u003e","brand":"Black Scorpion Outdoor Gear","offers":[{"title":"Right-Hand Draw \/ Black","offer_id":45331150372907,"sku":"HC36-QMBK-XPCOMPTLR1","price":174.99,"currency_code":"USD","in_stock":true},{"title":"Right-Hand Draw \/ Carbon Fiber","offer_id":45331150405675,"sku":"HC36-QMCF-XPCOMPTLR1","price":179.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0122\/5696\/8763\/files\/BSG_Level_II_New_Strap_QMH_1.jpg?v=1789137812"},{"product_id":"girsan-witness-2311-match-x-tlr1-hlx-level-2-tactical-quick-mount-holster","title":"Girsan Witness 2311 Match X w\/ Streamlight TLR-1 HLX Level 2 Tactical Quick Mount Holster","description":"\u003cp\u003eBuilt for shooters who move. This is the 0.093'' Level II Tactical shell on our Quick Mount belt attachment. The holster rides on your belt and comes off the attachment with the push of a button, no tools needed.\u003c\/p\u003e\u003cp\u003eRetention is a spring-loaded Level II hood. Press the button on the side of the hood and it travels forward, clear of the slide, and the pistol comes straight up. It resets on the reholster. The button sits under your thumb, not your trigger finger.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThicker shell, set once\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe shell is 0.093'' Kydex, a full gauge step up from the 0.080'' most holsters are cut from. It holds its shape better under a hard draw.\u003c\/p\u003e\u003cp\u003eThe retention hardware is riveted, not screwed. Retention is set at the bench and it stays there. Nothing to back out on a stage, nothing to lose in the bottom of a range bag. Retention is not adjustable on this build, which is the point: it is set once and it does not move.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQuick Mount attachment\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe belt attachment is machined from anodized aluminum and comes in black. It fits 1.5'' belts.\u003c\/p\u003e\u003cp\u003ePush the Quick Mount release button to take the holster off the attachment. The attachment stays on your belt, so the holster comes off and goes back on without taking your belt off.\u003c\/p\u003e\u003cp\u003eThe holster body is riveted, so there is nothing on it to loosen. Check that the belt attachment hardware is tight before you run it hard.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it's legal\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eUSPSA Multigun rules allow a holster on a belt worn at waist level, and rule 5.2.1.3.1 requires it to retain the pistol during the vigorous movement that may be required during the courses of fire. That is what the Level II hood is for. The Tactical Games allows hip-level holsters, and bans appendix, small of back, fanny pack, and shoulder rigs.\u003c\/p\u003e\u003cp\u003eUSPSA and IDPA pistol matches are stricter. Both limit how far the holster can sit out from your belt or body, and USPSA sets that limit by division. Measure your setup against the rulebook for the match and division you shoot before gear check.\u003c\/p\u003e\u003cp\u003eThe open, tapered muzzle clears threaded barrels and compensators. Cut to accept slide-mounted optics and suppressor height sights.\u003c\/p\u003e\u003cp\u003eRight-hand draw. Holster shell in Black or Carbon Fiber, Quick Mount attachment in black. Lifetime warranty against cracks and defects. Free US shipping, same-day dispatch on orders placed before 2 PM EST.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCompatible Model(s):\u003c\/strong\u003e\u003cspan\u003e Girsan Witness 2311 Match X with the Streamlight TLR-1 HLX\u003c\/span\u003e\u003c\/p\u003e","brand":"Black Scorpion Outdoor Gear","offers":[{"title":"Right-Hand Draw \/ Black","offer_id":45331150438443,"sku":"HC36-QMBK-2311MATCHTLR1","price":174.99,"currency_code":"USD","in_stock":true},{"title":"Right-Hand Draw \/ Carbon Fiber","offer_id":45331150471211,"sku":"HC36-QMCF-2311MATCHTLR1","price":179.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0122\/5696\/8763\/files\/BSG_Level_II_New_Strap_QMH_1.jpg?v=1789137812"},{"product_id":"glock-17-19-19x-22-31-44-45-tlr1-hlx-level-2-tactical-quick-mount-holster","title":"Glock 17, 19, 19X, 22, 31, 44, 45 w\/ Streamlight TLR-1 HLX Level 2 Tactical Quick Mount Holster","description":"\u003cp\u003eBuilt for shooters who move. This is the 0.093'' Level II Tactical shell on our Quick Mount belt attachment. The holster rides on your belt and comes off the attachment with the push of a button, no tools needed.\u003c\/p\u003e\u003cp\u003eRetention is a spring-loaded Level II hood. Press the button on the side of the hood and it travels forward, clear of the slide, and the pistol comes straight up. It resets on the reholster. The button sits under your thumb, not your trigger finger.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThicker shell, set once\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe shell is 0.093'' Kydex, a full gauge step up from the 0.080'' most holsters are cut from. It holds its shape better under a hard draw.\u003c\/p\u003e\u003cp\u003eThe retention hardware is riveted, not screwed. Retention is set at the bench and it stays there. Nothing to back out on a stage, nothing to lose in the bottom of a range bag. Retention is not adjustable on this build, which is the point: it is set once and it does not move.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQuick Mount attachment\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe belt attachment is machined from anodized aluminum and comes in black. It fits 1.5'' belts.\u003c\/p\u003e\u003cp\u003ePush the Quick Mount release button to take the holster off the attachment. The attachment stays on your belt, so the holster comes off and goes back on without taking your belt off.\u003c\/p\u003e\u003cp\u003eThe holster body is riveted, so there is nothing on it to loosen. Check that the belt attachment hardware is tight before you run it hard.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it's legal\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eUSPSA Multigun rules allow a holster on a belt worn at waist level, and rule 5.2.1.3.1 requires it to retain the pistol during the vigorous movement that may be required during the courses of fire. That is what the Level II hood is for. The Tactical Games allows hip-level holsters, and bans appendix, small of back, fanny pack, and shoulder rigs.\u003c\/p\u003e\u003cp\u003eUSPSA and IDPA pistol matches are stricter. Both limit how far the holster can sit out from your belt or body, and USPSA sets that limit by division. Measure your setup against the rulebook for the match and division you shoot before gear check.\u003c\/p\u003e\u003cp\u003eThe open, tapered muzzle clears threaded barrels and compensators. Cut to accept slide-mounted optics and suppressor height sights.\u003c\/p\u003e\u003cp\u003eRight-hand draw. Holster shell in Black or Carbon Fiber, Quick Mount attachment in black. Lifetime warranty against cracks and defects. Free US shipping, same-day dispatch on orders placed before 2 PM EST.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCompatible Model(s):\u003c\/strong\u003e\u003cspan\u003e Glock 17, 19, 19X, 22, 31, 44, 45 with the Streamlight TLR-1 HLX\u003c\/span\u003e\u003c\/p\u003e","brand":"Black Scorpion Outdoor Gear","offers":[{"title":"Right-Hand Draw \/ Black","offer_id":45331150602283,"sku":"HC36-QMBK-GL17TLR1","price":174.99,"currency_code":"USD","in_stock":true},{"title":"Right-Hand Draw \/ Carbon Fiber","offer_id":45331150635051,"sku":"HC36-QMCF-GL17TLR1","price":179.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0122\/5696\/8763\/files\/BSG_Level_II_New_Strap_QMH_1.jpg?v=1789137812"},{"product_id":"glock-40-mos-gen-4-tlr1-hlx-level-2-tactical-quick-mount-holster","title":"Glock 40 MOS Gen 4 w\/ Streamlight TLR-1 HLX Level 2 Tactical Quick Mount Holster","description":"\u003cp\u003eBuilt for shooters who move. This is the 0.093'' Level II Tactical shell on our Quick Mount belt attachment. The holster rides on your belt and comes off the attachment with the push of a button, no tools needed.\u003c\/p\u003e\u003cp\u003eRetention is a spring-loaded Level II hood. Press the button on the side of the hood and it travels forward, clear of the slide, and the pistol comes straight up. It resets on the reholster. The button sits under your thumb, not your trigger finger.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThicker shell, set once\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe shell is 0.093'' Kydex, a full gauge step up from the 0.080'' most holsters are cut from. It holds its shape better under a hard draw.\u003c\/p\u003e\u003cp\u003eThe retention hardware is riveted, not screwed. Retention is set at the bench and it stays there. Nothing to back out on a stage, nothing to lose in the bottom of a range bag. Retention is not adjustable on this build, which is the point: it is set once and it does not move.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQuick Mount attachment\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe belt attachment is machined from anodized aluminum and comes in black. It fits 1.5'' belts.\u003c\/p\u003e\u003cp\u003ePush the Quick Mount release button to take the holster off the attachment. The attachment stays on your belt, so the holster comes off and goes back on without taking your belt off.\u003c\/p\u003e\u003cp\u003eThe holster body is riveted, so there is nothing on it to loosen. Check that the belt attachment hardware is tight before you run it hard.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it's legal\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eUSPSA Multigun rules allow a holster on a belt worn at waist level, and rule 5.2.1.3.1 requires it to retain the pistol during the vigorous movement that may be required during the courses of fire. That is what the Level II hood is for. The Tactical Games allows hip-level holsters, and bans appendix, small of back, fanny pack, and shoulder rigs.\u003c\/p\u003e\u003cp\u003eUSPSA and IDPA pistol matches are stricter. Both limit how far the holster can sit out from your belt or body, and USPSA sets that limit by division. Measure your setup against the rulebook for the match and division you shoot before gear check.\u003c\/p\u003e\u003cp\u003eThe open, tapered muzzle clears threaded barrels and compensators. Cut to accept slide-mounted optics and suppressor height sights.\u003c\/p\u003e\u003cp\u003eRight-hand draw. Holster shell in Black or Carbon Fiber, Quick Mount attachment in black. Lifetime warranty against cracks and defects. Free US shipping, same-day dispatch on orders placed before 2 PM EST.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCompatible Model(s):\u003c\/strong\u003e\u003cspan\u003e Glock 40 MOS Gen 4 with the Streamlight TLR-1 HLX\u003c\/span\u003e\u003c\/p\u003e","brand":"Black Scorpion Outdoor Gear","offers":[{"title":"Right-Hand Draw \/ Black","offer_id":45331150667819,"sku":"HC36-QMBK-GL40TLR1","price":174.99,"currency_code":"USD","in_stock":true},{"title":"Right-Hand Draw \/ Carbon Fiber","offer_id":45331150700587,"sku":"HC36-QMCF-GL40TLR1","price":179.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0122\/5696\/8763\/files\/BSG_Level_II_New_Strap_QMH_1.jpg?v=1789137812"},{"product_id":"glock-47-mos-tlr1-hlx-level-2-tactical-quick-mount-holster","title":"Glock 47 MOS w\/ Streamlight TLR-1 HLX Level 2 Tactical Quick Mount Holster","description":"\u003cp\u003eBuilt for shooters who move. This is the 0.093'' Level II Tactical shell on our Quick Mount belt attachment. The holster rides on your belt and comes off the attachment with the push of a button, no tools needed.\u003c\/p\u003e\u003cp\u003eRetention is a spring-loaded Level II hood. Press the button on the side of the hood and it travels forward, clear of the slide, and the pistol comes straight up. It resets on the reholster. The button sits under your thumb, not your trigger finger.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThicker shell, set once\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe shell is 0.093'' Kydex, a full gauge step up from the 0.080'' most holsters are cut from. It holds its shape better under a hard draw.\u003c\/p\u003e\u003cp\u003eThe retention hardware is riveted, not screwed. Retention is set at the bench and it stays there. Nothing to back out on a stage, nothing to lose in the bottom of a range bag. Retention is not adjustable on this build, which is the point: it is set once and it does not move.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQuick Mount attachment\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe belt attachment is machined from anodized aluminum and comes in black. It fits 1.5'' belts.\u003c\/p\u003e\u003cp\u003ePush the Quick Mount release button to take the holster off the attachment. The attachment stays on your belt, so the holster comes off and goes back on without taking your belt off.\u003c\/p\u003e\u003cp\u003eThe holster body is riveted, so there is nothing on it to loosen. Check that the belt attachment hardware is tight before you run it hard.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it's legal\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eUSPSA Multigun rules allow a holster on a belt worn at waist level, and rule 5.2.1.3.1 requires it to retain the pistol during the vigorous movement that may be required during the courses of fire. That is what the Level II hood is for. The Tactical Games allows hip-level holsters, and bans appendix, small of back, fanny pack, and shoulder rigs.\u003c\/p\u003e\u003cp\u003eUSPSA and IDPA pistol matches are stricter. Both limit how far the holster can sit out from your belt or body, and USPSA sets that limit by division. Measure your setup against the rulebook for the match and division you shoot before gear check.\u003c\/p\u003e\u003cp\u003eThe open, tapered muzzle clears threaded barrels and compensators. Cut to accept slide-mounted optics and suppressor height sights.\u003c\/p\u003e\u003cp\u003eRight-hand draw. Holster shell in Black or Carbon Fiber, Quick Mount attachment in black. Lifetime warranty against cracks and defects. Free US shipping, same-day dispatch on orders placed before 2 PM EST.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCompatible Model(s):\u003c\/strong\u003e\u003cspan\u003e Glock 47 MOS with the Streamlight TLR-1 HLX\u003c\/span\u003e\u003c\/p\u003e","brand":"Black Scorpion Outdoor Gear","offers":[{"title":"Right-Hand Draw \/ Black","offer_id":45331150766123,"sku":"HC36-QMBK-GL47TLR1","price":174.99,"currency_code":"USD","in_stock":true},{"title":"Right-Hand Draw \/ Carbon Fiber","offer_id":45331150798891,"sku":"HC36-QMCF-GL47TLR1","price":179.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0122\/5696\/8763\/files\/BSG_Level_II_New_Strap_QMH_1.jpg?v=1789137812"},{"product_id":"hk-vp9-4-17-tlr1-hlx-level-2-tactical-quick-mount-holster","title":"Heckler \u0026 Koch VP9 4.17'' w\/ Streamlight TLR-1 HLX Level 2 Tactical Quick Mount Holster","description":"\u003cp\u003eBuilt for shooters who move. This is the 0.093'' Level II Tactical shell on our Quick Mount belt attachment. The holster rides on your belt and comes off the attachment with the push of a button, no tools needed.\u003c\/p\u003e\u003cp\u003eRetention is a spring-loaded Level II hood. Press the button on the side of the hood and it travels forward, clear of the slide, and the pistol comes straight up. It resets on the reholster. The button sits under your thumb, not your trigger finger.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThicker shell, set once\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe shell is 0.093'' Kydex, a full gauge step up from the 0.080'' most holsters are cut from. It holds its shape better under a hard draw.\u003c\/p\u003e\u003cp\u003eThe retention hardware is riveted, not screwed. Retention is set at the bench and it stays there. Nothing to back out on a stage, nothing to lose in the bottom of a range bag. Retention is not adjustable on this build, which is the point: it is set once and it does not move.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQuick Mount attachment\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe belt attachment is machined from anodized aluminum and comes in black. It fits 1.5'' belts.\u003c\/p\u003e\u003cp\u003ePush the Quick Mount release button to take the holster off the attachment. The attachment stays on your belt, so the holster comes off and goes back on without taking your belt off.\u003c\/p\u003e\u003cp\u003eThe holster body is riveted, so there is nothing on it to loosen. Check that the belt attachment hardware is tight before you run it hard.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it's legal\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eUSPSA Multigun rules allow a holster on a belt worn at waist level, and rule 5.2.1.3.1 requires it to retain the pistol during the vigorous movement that may be required during the courses of fire. That is what the Level II hood is for. The Tactical Games allows hip-level holsters, and bans appendix, small of back, fanny pack, and shoulder rigs.\u003c\/p\u003e\u003cp\u003eUSPSA and IDPA pistol matches are stricter. Both limit how far the holster can sit out from your belt or body, and USPSA sets that limit by division. Measure your setup against the rulebook for the match and division you shoot before gear check.\u003c\/p\u003e\u003cp\u003eThe open, tapered muzzle clears threaded barrels and compensators. Cut to accept slide-mounted optics and suppressor height sights.\u003c\/p\u003e\u003cp\u003eRight-hand draw. Holster shell in Black or Carbon Fiber, Quick Mount attachment in black. Lifetime warranty against cracks and defects. Free US shipping, same-day dispatch on orders placed before 2 PM EST.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCompatible Model(s):\u003c\/strong\u003e\u003cspan\u003e Heckler \u0026amp; Koch VP9 4.17'' with the Streamlight TLR-1 HLX\u003c\/span\u003e\u003c\/p\u003e","brand":"Black Scorpion Outdoor Gear","offers":[{"title":"Right-Hand Draw \/ Black","offer_id":45331150831659,"sku":"HC36-QMBK-VP9TLR1","price":174.99,"currency_code":"USD","in_stock":true},{"title":"Right-Hand Draw \/ Carbon Fiber","offer_id":45331150864427,"sku":"HC36-QMCF-VP9TLR1","price":179.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0122\/5696\/8763\/files\/BSG_Level_II_New_Strap_QMH_1.jpg?v=1789137812"},{"product_id":"hk-vp9a1-f-tlr1-hlx-level-2-tactical-quick-mount-holster","title":"Heckler \u0026 Koch VP9A1 F w\/ Streamlight TLR-1 HLX Level 2 Tactical Quick Mount Holster","description":"\u003cp\u003eBuilt for shooters who move. This is the 0.093'' Level II Tactical shell on our Quick Mount belt attachment. The holster rides on your belt and comes off the attachment with the push of a button, no tools needed.\u003c\/p\u003e\u003cp\u003eRetention is a spring-loaded Level II hood. Press the button on the side of the hood and it travels forward, clear of the slide, and the pistol comes straight up. It resets on the reholster. The button sits under your thumb, not your trigger finger.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThicker shell, set once\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe shell is 0.093'' Kydex, a full gauge step up from the 0.080'' most holsters are cut from. It holds its shape better under a hard draw.\u003c\/p\u003e\u003cp\u003eThe retention hardware is riveted, not screwed. Retention is set at the bench and it stays there. Nothing to back out on a stage, nothing to lose in the bottom of a range bag. Retention is not adjustable on this build, which is the point: it is set once and it does not move.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQuick Mount attachment\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe belt attachment is machined from anodized aluminum and comes in black. It fits 1.5'' belts.\u003c\/p\u003e\u003cp\u003ePush the Quick Mount release button to take the holster off the attachment. The attachment stays on your belt, so the holster comes off and goes back on without taking your belt off.\u003c\/p\u003e\u003cp\u003eThe holster body is riveted, so there is nothing on it to loosen. Check that the belt attachment hardware is tight before you run it hard.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it's legal\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eUSPSA Multigun rules allow a holster on a belt worn at waist level, and rule 5.2.1.3.1 requires it to retain the pistol during the vigorous movement that may be required during the courses of fire. That is what the Level II hood is for. The Tactical Games allows hip-level holsters, and bans appendix, small of back, fanny pack, and shoulder rigs.\u003c\/p\u003e\u003cp\u003eUSPSA and IDPA pistol matches are stricter. Both limit how far the holster can sit out from your belt or body, and USPSA sets that limit by division. Measure your setup against the rulebook for the match and division you shoot before gear check.\u003c\/p\u003e\u003cp\u003eThe open, tapered muzzle clears threaded barrels and compensators. Cut to accept slide-mounted optics and suppressor height sights.\u003c\/p\u003e\u003cp\u003eRight-hand draw. Holster shell in Black or Carbon Fiber, Quick Mount attachment in black. Lifetime warranty against cracks and defects. Free US shipping, same-day dispatch on orders placed before 2 PM EST.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCompatible Model(s):\u003c\/strong\u003e\u003cspan\u003e Heckler \u0026amp; Koch VP9A1 F with the Streamlight TLR-1 HLX\u003c\/span\u003e\u003c\/p\u003e","brand":"Black Scorpion Outdoor Gear","offers":[{"title":"Right-Hand Draw \/ Black","offer_id":45331150897195,"sku":"HC36-QMBK-VP9A1FTLR1","price":174.99,"currency_code":"USD","in_stock":true},{"title":"Right-Hand Draw \/ Carbon Fiber","offer_id":45331150929963,"sku":"HC36-QMCF-VP9A1FTLR1","price":179.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0122\/5696\/8763\/files\/BSG_Level_II_New_Strap_QMH_1.jpg?v=1789137812"},{"product_id":"iwi-masada-4-1-tlr1-hlx-level-2-tactical-quick-mount-holster","title":"IWI MASADA 4.1'' w\/ Streamlight TLR-1 HLX Level 2 Tactical Quick Mount Holster","description":"\u003cp\u003eBuilt for shooters who move. This is the 0.093'' Level II Tactical shell on our Quick Mount belt attachment. The holster rides on your belt and comes off the attachment with the push of a button, no tools needed.\u003c\/p\u003e\u003cp\u003eRetention is a spring-loaded Level II hood. Press the button on the side of the hood and it travels forward, clear of the slide, and the pistol comes straight up. It resets on the reholster. The button sits under your thumb, not your trigger finger.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThicker shell, set once\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe shell is 0.093'' Kydex, a full gauge step up from the 0.080'' most holsters are cut from. It holds its shape better under a hard draw.\u003c\/p\u003e\u003cp\u003eThe retention hardware is riveted, not screwed. Retention is set at the bench and it stays there. Nothing to back out on a stage, nothing to lose in the bottom of a range bag. Retention is not adjustable on this build, which is the point: it is set once and it does not move.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQuick Mount attachment\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe belt attachment is machined from anodized aluminum and comes in black. It fits 1.5'' belts.\u003c\/p\u003e\u003cp\u003ePush the Quick Mount release button to take the holster off the attachment. The attachment stays on your belt, so the holster comes off and goes back on without taking your belt off.\u003c\/p\u003e\u003cp\u003eThe holster body is riveted, so there is nothing on it to loosen. Check that the belt attachment hardware is tight before you run it hard.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it's legal\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eUSPSA Multigun rules allow a holster on a belt worn at waist level, and rule 5.2.1.3.1 requires it to retain the pistol during the vigorous movement that may be required during the courses of fire. That is what the Level II hood is for. The Tactical Games allows hip-level holsters, and bans appendix, small of back, fanny pack, and shoulder rigs.\u003c\/p\u003e\u003cp\u003eUSPSA and IDPA pistol matches are stricter. Both limit how far the holster can sit out from your belt or body, and USPSA sets that limit by division. Measure your setup against the rulebook for the match and division you shoot before gear check.\u003c\/p\u003e\u003cp\u003eThe open, tapered muzzle clears threaded barrels and compensators. Cut to accept slide-mounted optics and suppressor height sights.\u003c\/p\u003e\u003cp\u003eRight-hand draw. Holster shell in Black or Carbon Fiber, Quick Mount attachment in black. Lifetime warranty against cracks and defects. Free US shipping, same-day dispatch on orders placed before 2 PM EST.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCompatible Model(s):\u003c\/strong\u003e\u003cspan\u003e IWI MASADA 4.1'' with the Streamlight TLR-1 HLX\u003c\/span\u003e\u003c\/p\u003e","brand":"Black Scorpion Outdoor Gear","offers":[{"title":"Right-Hand Draw \/ Black","offer_id":45331150962731,"sku":"HC36-QMBK-MASADATLR1","price":174.99,"currency_code":"USD","in_stock":true},{"title":"Right-Hand Draw \/ Carbon Fiber","offer_id":45331150995499,"sku":"HC36-QMCF-MASADATLR1","price":179.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0122\/5696\/8763\/files\/BSG_Level_II_New_Strap_QMH_1.jpg?v=1789137812"},{"product_id":"jacob-grey-twc-hex-4-25-tlr1-hlx-level-2-tactical-quick-mount-holster","title":"Jacob Grey TWC Hex 4.25'' w\/ Streamlight TLR-1 HLX Level 2 Tactical Quick Mount Holster","description":"\u003cp\u003eBuilt for shooters who move. This is the 0.093'' Level II Tactical shell on our Quick Mount belt attachment. The holster rides on your belt and comes off the attachment with the push of a button, no tools needed.\u003c\/p\u003e\u003cp\u003eRetention is a spring-loaded Level II hood. Press the button on the side of the hood and it travels forward, clear of the slide, and the pistol comes straight up. It resets on the reholster. The button sits under your thumb, not your trigger finger.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThicker shell, set once\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe shell is 0.093'' Kydex, a full gauge step up from the 0.080'' most holsters are cut from. It holds its shape better under a hard draw.\u003c\/p\u003e\u003cp\u003eThe retention hardware is riveted, not screwed. Retention is set at the bench and it stays there. Nothing to back out on a stage, nothing to lose in the bottom of a range bag. Retention is not adjustable on this build, which is the point: it is set once and it does not move.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQuick Mount attachment\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe belt attachment is machined from anodized aluminum and comes in black. It fits 1.5'' belts.\u003c\/p\u003e\u003cp\u003ePush the Quick Mount release button to take the holster off the attachment. The attachment stays on your belt, so the holster comes off and goes back on without taking your belt off.\u003c\/p\u003e\u003cp\u003eThe holster body is riveted, so there is nothing on it to loosen. Check that the belt attachment hardware is tight before you run it hard.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it's legal\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eUSPSA Multigun rules allow a holster on a belt worn at waist level, and rule 5.2.1.3.1 requires it to retain the pistol during the vigorous movement that may be required during the courses of fire. That is what the Level II hood is for. The Tactical Games allows hip-level holsters, and bans appendix, small of back, fanny pack, and shoulder rigs.\u003c\/p\u003e\u003cp\u003eUSPSA and IDPA pistol matches are stricter. Both limit how far the holster can sit out from your belt or body, and USPSA sets that limit by division. Measure your setup against the rulebook for the match and division you shoot before gear check.\u003c\/p\u003e\u003cp\u003eThe open, tapered muzzle clears threaded barrels and compensators. Cut to accept slide-mounted optics and suppressor height sights.\u003c\/p\u003e\u003cp\u003eRight-hand draw. Holster shell in Black or Carbon Fiber, Quick Mount attachment in black. Lifetime warranty against cracks and defects. Free US shipping, same-day dispatch on orders placed before 2 PM EST.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCompatible Model(s):\u003c\/strong\u003e\u003cspan\u003e Jacob Grey TWC Hex 4.25'' with the Streamlight TLR-1 HLX\u003c\/span\u003e\u003c\/p\u003e","brand":"Black Scorpion Outdoor Gear","offers":[{"title":"Right-Hand Draw \/ Black","offer_id":45331151028267,"sku":"HC36-QMBK-JGHEXTLR1","price":174.99,"currency_code":"USD","in_stock":true},{"title":"Right-Hand Draw \/ Carbon Fiber","offer_id":45331151061035,"sku":"HC36-QMCF-JGHEXTLR1","price":179.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0122\/5696\/8763\/files\/BSG_Level_II_New_Strap_QMH_1.jpg?v=1789137812"},{"product_id":"kimber-1911-ds-warrior-tlr1-hlx-level-2-tactical-quick-mount-holster","title":"Kimber 1911 DS Warrior w\/ Streamlight TLR-1 HLX Level 2 Tactical Quick Mount Holster","description":"\u003cp\u003eBuilt for shooters who move. This is the 0.093'' Level II Tactical shell on our Quick Mount belt attachment. The holster rides on your belt and comes off the attachment with the push of a button, no tools needed.\u003c\/p\u003e\u003cp\u003eRetention is a spring-loaded Level II hood. Press the button on the side of the hood and it travels forward, clear of the slide, and the pistol comes straight up. It resets on the reholster. The button sits under your thumb, not your trigger finger.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThicker shell, set once\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe shell is 0.093'' Kydex, a full gauge step up from the 0.080'' most holsters are cut from. It holds its shape better under a hard draw.\u003c\/p\u003e\u003cp\u003eThe retention hardware is riveted, not screwed. Retention is set at the bench and it stays there. Nothing to back out on a stage, nothing to lose in the bottom of a range bag. Retention is not adjustable on this build, which is the point: it is set once and it does not move.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQuick Mount attachment\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe belt attachment is machined from anodized aluminum and comes in black. It fits 1.5'' belts.\u003c\/p\u003e\u003cp\u003ePush the Quick Mount release button to take the holster off the attachment. The attachment stays on your belt, so the holster comes off and goes back on without taking your belt off.\u003c\/p\u003e\u003cp\u003eThe holster body is riveted, so there is nothing on it to loosen. Check that the belt attachment hardware is tight before you run it hard.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it's legal\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eUSPSA Multigun rules allow a holster on a belt worn at waist level, and rule 5.2.1.3.1 requires it to retain the pistol during the vigorous movement that may be required during the courses of fire. That is what the Level II hood is for. The Tactical Games allows hip-level holsters, and bans appendix, small of back, fanny pack, and shoulder rigs.\u003c\/p\u003e\u003cp\u003eUSPSA and IDPA pistol matches are stricter. Both limit how far the holster can sit out from your belt or body, and USPSA sets that limit by division. Measure your setup against the rulebook for the match and division you shoot before gear check.\u003c\/p\u003e\u003cp\u003eThe open, tapered muzzle clears threaded barrels and compensators. Cut to accept slide-mounted optics and suppressor height sights.\u003c\/p\u003e\u003cp\u003eRight-hand draw. Holster shell in Black or Carbon Fiber, Quick Mount attachment in black. Lifetime warranty against cracks and defects. Free US shipping, same-day dispatch on orders placed before 2 PM EST.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCompatible Model(s):\u003c\/strong\u003e\u003cspan\u003e Kimber 1911 DS Warrior with the Streamlight TLR-1 HLX\u003c\/span\u003e\u003c\/p\u003e","brand":"Black Scorpion Outdoor Gear","offers":[{"title":"Right-Hand Draw \/ Black","offer_id":45331151093803,"sku":"HC36-QMBK-1911WARRIORTLR1","price":174.99,"currency_code":"USD","in_stock":true},{"title":"Right-Hand Draw \/ Carbon Fiber","offer_id":45331151126571,"sku":"HC36-QMCF-1911WARRIORTLR1","price":179.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0122\/5696\/8763\/files\/BSG_Level_II_New_Strap_QMH_1.jpg?v=1789137812"},{"product_id":"kimber-2k11-tlr1-hlx-level-2-tactical-quick-mount-holster","title":"Kimber 2K11 w\/ Streamlight TLR-1 HLX Level 2 Tactical Quick Mount Holster","description":"\u003cp\u003eBuilt for shooters who move. This is the 0.093'' Level II Tactical shell on our Quick Mount belt attachment. The holster rides on your belt and comes off the attachment with the push of a button, no tools needed.\u003c\/p\u003e\u003cp\u003eRetention is a spring-loaded Level II hood. Press the button on the side of the hood and it travels forward, clear of the slide, and the pistol comes straight up. It resets on the reholster. The button sits under your thumb, not your trigger finger.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThicker shell, set once\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe shell is 0.093'' Kydex, a full gauge step up from the 0.080'' most holsters are cut from. It holds its shape better under a hard draw.\u003c\/p\u003e\u003cp\u003eThe retention hardware is riveted, not screwed. Retention is set at the bench and it stays there. Nothing to back out on a stage, nothing to lose in the bottom of a range bag. Retention is not adjustable on this build, which is the point: it is set once and it does not move.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQuick Mount attachment\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe belt attachment is machined from anodized aluminum and comes in black. It fits 1.5'' belts.\u003c\/p\u003e\u003cp\u003ePush the Quick Mount release button to take the holster off the attachment. The attachment stays on your belt, so the holster comes off and goes back on without taking your belt off.\u003c\/p\u003e\u003cp\u003eThe holster body is riveted, so there is nothing on it to loosen. Check that the belt attachment hardware is tight before you run it hard.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it's legal\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eUSPSA Multigun rules allow a holster on a belt worn at waist level, and rule 5.2.1.3.1 requires it to retain the pistol during the vigorous movement that may be required during the courses of fire. That is what the Level II hood is for. The Tactical Games allows hip-level holsters, and bans appendix, small of back, fanny pack, and shoulder rigs.\u003c\/p\u003e\u003cp\u003eUSPSA and IDPA pistol matches are stricter. Both limit how far the holster can sit out from your belt or body, and USPSA sets that limit by division. Measure your setup against the rulebook for the match and division you shoot before gear check.\u003c\/p\u003e\u003cp\u003eThe open, tapered muzzle clears threaded barrels and compensators. Cut to accept slide-mounted optics and suppressor height sights.\u003c\/p\u003e\u003cp\u003eRight-hand draw. Holster shell in Black or Carbon Fiber, Quick Mount attachment in black. Lifetime warranty against cracks and defects. Free US shipping, same-day dispatch on orders placed before 2 PM EST.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCompatible Model(s):\u003c\/strong\u003e\u003cspan\u003e Kimber 2K11 with the Streamlight TLR-1 HLX\u003c\/span\u003e\u003c\/p\u003e","brand":"Black Scorpion Outdoor Gear","offers":[{"title":"Right-Hand Draw \/ Black","offer_id":45331151224875,"sku":"HC36-QMBK-2K11TLR1","price":174.99,"currency_code":"USD","in_stock":true},{"title":"Right-Hand Draw \/ Carbon Fiber","offer_id":45331151257643,"sku":"HC36-QMCF-2K11TLR1","price":179.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0122\/5696\/8763\/files\/BSG_Level_II_New_Strap_QMH_1.jpg?v=1789137812"},{"product_id":"kimber-r7-mako-carbon-compact-tlr1-hlx-level-2-tactical-quick-mount-holster","title":"Kimber R7 Mako Carbon Compact w\/ Streamlight TLR-1 HLX Level 2 Tactical Quick Mount Holster","description":"\u003cp\u003eBuilt for shooters who move. This is the 0.093'' Level II Tactical shell on our Quick Mount belt attachment. The holster rides on your belt and comes off the attachment with the push of a button, no tools needed.\u003c\/p\u003e\u003cp\u003eRetention is a spring-loaded Level II hood. Press the button on the side of the hood and it travels forward, clear of the slide, and the pistol comes straight up. It resets on the reholster. The button sits under your thumb, not your trigger finger.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThicker shell, set once\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe shell is 0.093'' Kydex, a full gauge step up from the 0.080'' most holsters are cut from. It holds its shape better under a hard draw.\u003c\/p\u003e\u003cp\u003eThe retention hardware is riveted, not screwed. Retention is set at the bench and it stays there. Nothing to back out on a stage, nothing to lose in the bottom of a range bag. Retention is not adjustable on this build, which is the point: it is set once and it does not move.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQuick Mount attachment\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe belt attachment is machined from anodized aluminum and comes in black. It fits 1.5'' belts.\u003c\/p\u003e\u003cp\u003ePush the Quick Mount release button to take the holster off the attachment. The attachment stays on your belt, so the holster comes off and goes back on without taking your belt off.\u003c\/p\u003e\u003cp\u003eThe holster body is riveted, so there is nothing on it to loosen. Check that the belt attachment hardware is tight before you run it hard.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it's legal\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eUSPSA Multigun rules allow a holster on a belt worn at waist level, and rule 5.2.1.3.1 requires it to retain the pistol during the vigorous movement that may be required during the courses of fire. That is what the Level II hood is for. The Tactical Games allows hip-level holsters, and bans appendix, small of back, fanny pack, and shoulder rigs.\u003c\/p\u003e\u003cp\u003eUSPSA and IDPA pistol matches are stricter. Both limit how far the holster can sit out from your belt or body, and USPSA sets that limit by division. Measure your setup against the rulebook for the match and division you shoot before gear check.\u003c\/p\u003e\u003cp\u003eThe open, tapered muzzle clears threaded barrels and compensators. Cut to accept slide-mounted optics and suppressor height sights.\u003c\/p\u003e\u003cp\u003eRight-hand draw. Holster shell in Black or Carbon Fiber, Quick Mount attachment in black. Lifetime warranty against cracks and defects. Free US shipping, same-day dispatch on orders placed before 2 PM EST.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCompatible Model(s):\u003c\/strong\u003e\u003cspan\u003e Kimber R7 Mako Carbon Compact with the Streamlight TLR-1 HLX\u003c\/span\u003e\u003c\/p\u003e","brand":"Black Scorpion Outdoor Gear","offers":[{"title":"Right-Hand Draw \/ Black","offer_id":45331151323179,"sku":"HC36-QMBK-MAKOTLR1","price":174.99,"currency_code":"USD","in_stock":true},{"title":"Right-Hand Draw \/ Carbon Fiber","offer_id":45331151355947,"sku":"HC36-QMCF-MAKOTLR1","price":179.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0122\/5696\/8763\/files\/BSG_Level_II_New_Strap_QMH_1.jpg?v=1789137812"},{"product_id":"oa-defense-2311-compact-pro-elite-tlr1-hlx-level-2-tactical-quick-mount-holster","title":"OA Defense 2311 Compact Pro Elite w\/ Streamlight TLR-1 HLX Level 2 Tactical Quick Mount Holster","description":"\u003cp\u003eBuilt for shooters who move. This is the 0.093'' Level II Tactical shell on our Quick Mount belt attachment. The holster rides on your belt and comes off the attachment with the push of a button, no tools needed.\u003c\/p\u003e\u003cp\u003eRetention is a spring-loaded Level II hood. Press the button on the side of the hood and it travels forward, clear of the slide, and the pistol comes straight up. It resets on the reholster. The button sits under your thumb, not your trigger finger.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThicker shell, set once\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe shell is 0.093'' Kydex, a full gauge step up from the 0.080'' most holsters are cut from. It holds its shape better under a hard draw.\u003c\/p\u003e\u003cp\u003eThe retention hardware is riveted, not screwed. Retention is set at the bench and it stays there. Nothing to back out on a stage, nothing to lose in the bottom of a range bag. Retention is not adjustable on this build, which is the point: it is set once and it does not move.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQuick Mount attachment\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe belt attachment is machined from anodized aluminum and comes in black. It fits 1.5'' belts.\u003c\/p\u003e\u003cp\u003ePush the Quick Mount release button to take the holster off the attachment. The attachment stays on your belt, so the holster comes off and goes back on without taking your belt off.\u003c\/p\u003e\u003cp\u003eThe holster body is riveted, so there is nothing on it to loosen. Check that the belt attachment hardware is tight before you run it hard.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it's legal\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eUSPSA Multigun rules allow a holster on a belt worn at waist level, and rule 5.2.1.3.1 requires it to retain the pistol during the vigorous movement that may be required during the courses of fire. That is what the Level II hood is for. The Tactical Games allows hip-level holsters, and bans appendix, small of back, fanny pack, and shoulder rigs.\u003c\/p\u003e\u003cp\u003eUSPSA and IDPA pistol matches are stricter. Both limit how far the holster can sit out from your belt or body, and USPSA sets that limit by division. Measure your setup against the rulebook for the match and division you shoot before gear check.\u003c\/p\u003e\u003cp\u003eThe open, tapered muzzle clears threaded barrels and compensators. Cut to accept slide-mounted optics and suppressor height sights.\u003c\/p\u003e\u003cp\u003eRight-hand draw. Holster shell in Black or Carbon Fiber, Quick Mount attachment in black. Lifetime warranty against cracks and defects. Free US shipping, same-day dispatch on orders placed before 2 PM EST.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCompatible Model(s):\u003c\/strong\u003e\u003cspan\u003e OA Defense 2311 Compact Pro Elite with the Streamlight TLR-1 HLX\u003c\/span\u003e\u003c\/p\u003e","brand":"Black Scorpion Outdoor Gear","offers":[{"title":"Right-Hand Draw \/ Black","offer_id":45331151421483,"sku":"HC36-QMBK-OA2311COMPTLR1","price":174.99,"currency_code":"USD","in_stock":true},{"title":"Right-Hand Draw \/ Carbon Fiber","offer_id":45331151454251,"sku":"HC36-QMCF-OA2311COMPTLR1","price":179.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0122\/5696\/8763\/files\/BSG_Level_II_New_Strap_QMH_1.jpg?v=1789137812"},{"product_id":"oa-defense-2311-pro-elite-tlr1-hlx-level-2-tactical-quick-mount-holster","title":"OA Defense 2311 Pro Elite w\/ Streamlight TLR-1 HLX Level 2 Tactical Quick Mount Holster","description":"\u003cp\u003eBuilt for shooters who move. This is the 0.093'' Level II Tactical shell on our Quick Mount belt attachment. The holster rides on your belt and comes off the attachment with the push of a button, no tools needed.\u003c\/p\u003e\u003cp\u003eRetention is a spring-loaded Level II hood. Press the button on the side of the hood and it travels forward, clear of the slide, and the pistol comes straight up. It resets on the reholster. The button sits under your thumb, not your trigger finger.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThicker shell, set once\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe shell is 0.093'' Kydex, a full gauge step up from the 0.080'' most holsters are cut from. It holds its shape better under a hard draw.\u003c\/p\u003e\u003cp\u003eThe retention hardware is riveted, not screwed. Retention is set at the bench and it stays there. Nothing to back out on a stage, nothing to lose in the bottom of a range bag. Retention is not adjustable on this build, which is the point: it is set once and it does not move.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQuick Mount attachment\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe belt attachment is machined from anodized aluminum and comes in black. It fits 1.5'' belts.\u003c\/p\u003e\u003cp\u003ePush the Quick Mount release button to take the holster off the attachment. The attachment stays on your belt, so the holster comes off and goes back on without taking your belt off.\u003c\/p\u003e\u003cp\u003eThe holster body is riveted, so there is nothing on it to loosen. Check that the belt attachment hardware is tight before you run it hard.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it's legal\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eUSPSA Multigun rules allow a holster on a belt worn at waist level, and rule 5.2.1.3.1 requires it to retain the pistol during the vigorous movement that may be required during the courses of fire. That is what the Level II hood is for. The Tactical Games allows hip-level holsters, and bans appendix, small of back, fanny pack, and shoulder rigs.\u003c\/p\u003e\u003cp\u003eUSPSA and IDPA pistol matches are stricter. Both limit how far the holster can sit out from your belt or body, and USPSA sets that limit by division. Measure your setup against the rulebook for the match and division you shoot before gear check.\u003c\/p\u003e\u003cp\u003eThe open, tapered muzzle clears threaded barrels and compensators. Cut to accept slide-mounted optics and suppressor height sights.\u003c\/p\u003e\u003cp\u003eRight-hand draw. Holster shell in Black or Carbon Fiber, Quick Mount attachment in black. Lifetime warranty against cracks and defects. Free US shipping, same-day dispatch on orders placed before 2 PM EST.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCompatible Model(s):\u003c\/strong\u003e\u003cspan\u003e OA Defense 2311 Pro Elite with the Streamlight TLR-1 HLX\u003c\/span\u003e\u003c\/p\u003e","brand":"Black Scorpion Outdoor Gear","offers":[{"title":"Right-Hand Draw \/ Black","offer_id":45331151552555,"sku":"HC36-QMBK-OA2311ELITETLR1","price":174.99,"currency_code":"USD","in_stock":true},{"title":"Right-Hand Draw \/ Carbon Fiber","offer_id":45331151585323,"sku":"HC36-QMCF-OA2311ELITETLR1","price":179.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0122\/5696\/8763\/files\/BSG_Level_II_New_Strap_QMH_1.jpg?v=1789137812"},{"product_id":"ruger-5-7-tlr1-hlx-level-2-tactical-quick-mount-holster","title":"Ruger 5.7 w\/ Streamlight TLR-1 HLX Level 2 Tactical Quick Mount Holster","description":"\u003cp\u003eBuilt for shooters who move. This is the 0.093'' Level II Tactical shell on our Quick Mount belt attachment. The holster rides on your belt and comes off the attachment with the push of a button, no tools needed.\u003c\/p\u003e\u003cp\u003eRetention is a spring-loaded Level II hood. Press the button on the side of the hood and it travels forward, clear of the slide, and the pistol comes straight up. It resets on the reholster. The button sits under your thumb, not your trigger finger.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThicker shell, set once\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe shell is 0.093'' Kydex, a full gauge step up from the 0.080'' most holsters are cut from. It holds its shape better under a hard draw.\u003c\/p\u003e\u003cp\u003eThe retention hardware is riveted, not screwed. Retention is set at the bench and it stays there. Nothing to back out on a stage, nothing to lose in the bottom of a range bag. Retention is not adjustable on this build, which is the point: it is set once and it does not move.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQuick Mount attachment\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe belt attachment is machined from anodized aluminum and comes in black. It fits 1.5'' belts.\u003c\/p\u003e\u003cp\u003ePush the Quick Mount release button to take the holster off the attachment. The attachment stays on your belt, so the holster comes off and goes back on without taking your belt off.\u003c\/p\u003e\u003cp\u003eThe holster body is riveted, so there is nothing on it to loosen. Check that the belt attachment hardware is tight before you run it hard.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it's legal\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eUSPSA Multigun rules allow a holster on a belt worn at waist level, and rule 5.2.1.3.1 requires it to retain the pistol during the vigorous movement that may be required during the courses of fire. That is what the Level II hood is for. The Tactical Games allows hip-level holsters, and bans appendix, small of back, fanny pack, and shoulder rigs.\u003c\/p\u003e\u003cp\u003eUSPSA and IDPA pistol matches are stricter. Both limit how far the holster can sit out from your belt or body, and USPSA sets that limit by division. Measure your setup against the rulebook for the match and division you shoot before gear check.\u003c\/p\u003e\u003cp\u003eThe open, tapered muzzle clears threaded barrels and compensators. Cut to accept slide-mounted optics and suppressor height sights.\u003c\/p\u003e\u003cp\u003eRight-hand draw. Holster shell in Black or Carbon Fiber, Quick Mount attachment in black. Lifetime warranty against cracks and defects. Free US shipping, same-day dispatch on orders placed before 2 PM EST.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCompatible Model(s):\u003c\/strong\u003e\u003cspan\u003e Ruger 5.7 with the Streamlight TLR-1 HLX\u003c\/span\u003e\u003c\/p\u003e","brand":"Black Scorpion Outdoor Gear","offers":[{"title":"Right-Hand Draw \/ Black","offer_id":45331152044075,"sku":"HC36-QMBK-RUGER57TLR1","price":174.99,"currency_code":"USD","in_stock":true},{"title":"Right-Hand Draw \/ Carbon Fiber","offer_id":45331152076843,"sku":"HC36-QMCF-RUGER57TLR1","price":179.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0122\/5696\/8763\/files\/BSG_Level_II_New_Strap_QMH_1.jpg?v=1789137812"},{"product_id":"ruger-rxm-4-5-tlr1-hlx-level-2-tactical-quick-mount-holster","title":"Ruger RXM 4.5'' w\/ Streamlight TLR-1 HLX Level 2 Tactical Quick Mount Holster","description":"\u003cp\u003eBuilt for shooters who move. This is the 0.093'' Level II Tactical shell on our Quick Mount belt attachment. The holster rides on your belt and comes off the attachment with the push of a button, no tools needed.\u003c\/p\u003e\u003cp\u003eRetention is a spring-loaded Level II hood. Press the button on the side of the hood and it travels forward, clear of the slide, and the pistol comes straight up. It resets on the reholster. The button sits under your thumb, not your trigger finger.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThicker shell, set once\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe shell is 0.093'' Kydex, a full gauge step up from the 0.080'' most holsters are cut from. It holds its shape better under a hard draw.\u003c\/p\u003e\u003cp\u003eThe retention hardware is riveted, not screwed. Retention is set at the bench and it stays there. Nothing to back out on a stage, nothing to lose in the bottom of a range bag. Retention is not adjustable on this build, which is the point: it is set once and it does not move.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQuick Mount attachment\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe belt attachment is machined from anodized aluminum and comes in black. It fits 1.5'' belts.\u003c\/p\u003e\u003cp\u003ePush the Quick Mount release button to take the holster off the attachment. The attachment stays on your belt, so the holster comes off and goes back on without taking your belt off.\u003c\/p\u003e\u003cp\u003eThe holster body is riveted, so there is nothing on it to loosen. Check that the belt attachment hardware is tight before you run it hard.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it's legal\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eUSPSA Multigun rules allow a holster on a belt worn at waist level, and rule 5.2.1.3.1 requires it to retain the pistol during the vigorous movement that may be required during the courses of fire. That is what the Level II hood is for. The Tactical Games allows hip-level holsters, and bans appendix, small of back, fanny pack, and shoulder rigs.\u003c\/p\u003e\u003cp\u003eUSPSA and IDPA pistol matches are stricter. Both limit how far the holster can sit out from your belt or body, and USPSA sets that limit by division. Measure your setup against the rulebook for the match and division you shoot before gear check.\u003c\/p\u003e\u003cp\u003eThe open, tapered muzzle clears threaded barrels and compensators. Cut to accept slide-mounted optics and suppressor height sights.\u003c\/p\u003e\u003cp\u003eRight-hand draw. Holster shell in Black or Carbon Fiber, Quick Mount attachment in black. Lifetime warranty against cracks and defects. Free US shipping, same-day dispatch on orders placed before 2 PM EST.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCompatible Model(s):\u003c\/strong\u003e\u003cspan\u003e Ruger RXM 4.5'' with the Streamlight TLR-1 HLX\u003c\/span\u003e\u003c\/p\u003e","brand":"Black Scorpion Outdoor Gear","offers":[{"title":"Right-Hand Draw \/ Black","offer_id":45331152142379,"sku":"HC36-QMBK-RXM45TLR1","price":174.99,"currency_code":"USD","in_stock":true},{"title":"Right-Hand Draw \/ Carbon Fiber","offer_id":45331152175147,"sku":"HC36-QMCF-RXM45TLR1","price":179.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0122\/5696\/8763\/files\/BSG_Level_II_New_Strap_QMH_1.jpg?v=1789137812"},{"product_id":"sig-sauer-p211-gto-tlr1-hlx-level-2-tactical-quick-mount-holster","title":"Sig Sauer P211 GTO w\/ Streamlight TLR-1 HLX Level 2 Tactical Quick Mount Holster","description":"\u003cp\u003eBuilt for shooters who move. This is the 0.093'' Level II Tactical shell on our Quick Mount belt attachment. The holster rides on your belt and comes off the attachment with the push of a button, no tools needed.\u003c\/p\u003e\u003cp\u003eRetention is a spring-loaded Level II hood. Press the button on the side of the hood and it travels forward, clear of the slide, and the pistol comes straight up. It resets on the reholster. The button sits under your thumb, not your trigger finger.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThicker shell, set once\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe shell is 0.093'' Kydex, a full gauge step up from the 0.080'' most holsters are cut from. It holds its shape better under a hard draw.\u003c\/p\u003e\u003cp\u003eThe retention hardware is riveted, not screwed. Retention is set at the bench and it stays there. Nothing to back out on a stage, nothing to lose in the bottom of a range bag. Retention is not adjustable on this build, which is the point: it is set once and it does not move.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQuick Mount attachment\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe belt attachment is machined from anodized aluminum and comes in black. It fits 1.5'' belts.\u003c\/p\u003e\u003cp\u003ePush the Quick Mount release button to take the holster off the attachment. The attachment stays on your belt, so the holster comes off and goes back on without taking your belt off.\u003c\/p\u003e\u003cp\u003eThe holster body is riveted, so there is nothing on it to loosen. Check that the belt attachment hardware is tight before you run it hard.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it's legal\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eUSPSA Multigun rules allow a holster on a belt worn at waist level, and rule 5.2.1.3.1 requires it to retain the pistol during the vigorous movement that may be required during the courses of fire. That is what the Level II hood is for. The Tactical Games allows hip-level holsters, and bans appendix, small of back, fanny pack, and shoulder rigs.\u003c\/p\u003e\u003cp\u003eUSPSA and IDPA pistol matches are stricter. Both limit how far the holster can sit out from your belt or body, and USPSA sets that limit by division. Measure your setup against the rulebook for the match and division you shoot before gear check.\u003c\/p\u003e\u003cp\u003eThe open, tapered muzzle clears threaded barrels and compensators. Cut to accept slide-mounted optics and suppressor height sights.\u003c\/p\u003e\u003cp\u003eRight-hand draw. Holster shell in Black or Carbon Fiber, Quick Mount attachment in black. Lifetime warranty against cracks and defects. Free US shipping, same-day dispatch on orders placed before 2 PM EST.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCompatible Model(s):\u003c\/strong\u003e\u003cspan\u003e Sig Sauer P211 GTO with the Streamlight TLR-1 HLX\u003c\/span\u003e\u003c\/p\u003e","brand":"Black Scorpion Outdoor Gear","offers":[{"title":"Right-Hand Draw \/ Black","offer_id":45331152437291,"sku":"HC36-QMBK-P211TLR1","price":174.99,"currency_code":"USD","in_stock":true},{"title":"Right-Hand Draw \/ Carbon Fiber","offer_id":45331152470059,"sku":"HC36-QMCF-P211TLR1","price":179.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0122\/5696\/8763\/files\/BSG_Level_II_New_Strap_QMH_1.jpg?v=1789137812"},{"product_id":"sig-sauer-p226-xfive-tlr1-hlx-level-2-tactical-quick-mount-holster","title":"Sig Sauer P226 XFIVE w\/ Streamlight TLR-1 HLX Level 2 Tactical Quick Mount Holster","description":"\u003cp\u003eBuilt for shooters who move. This is the 0.093'' Level II Tactical shell on our Quick Mount belt attachment. The holster rides on your belt and comes off the attachment with the push of a button, no tools needed.\u003c\/p\u003e\u003cp\u003eRetention is a spring-loaded Level II hood. Press the button on the side of the hood and it travels forward, clear of the slide, and the pistol comes straight up. It resets on the reholster. The button sits under your thumb, not your trigger finger.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThicker shell, set once\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe shell is 0.093'' Kydex, a full gauge step up from the 0.080'' most holsters are cut from. It holds its shape better under a hard draw.\u003c\/p\u003e\u003cp\u003eThe retention hardware is riveted, not screwed. Retention is set at the bench and it stays there. Nothing to back out on a stage, nothing to lose in the bottom of a range bag. Retention is not adjustable on this build, which is the point: it is set once and it does not move.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQuick Mount attachment\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe belt attachment is machined from anodized aluminum and comes in black. It fits 1.5'' belts.\u003c\/p\u003e\u003cp\u003ePush the Quick Mount release button to take the holster off the attachment. The attachment stays on your belt, so the holster comes off and goes back on without taking your belt off.\u003c\/p\u003e\u003cp\u003eThe holster body is riveted, so there is nothing on it to loosen. Check that the belt attachment hardware is tight before you run it hard.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it's legal\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eUSPSA Multigun rules allow a holster on a belt worn at waist level, and rule 5.2.1.3.1 requires it to retain the pistol during the vigorous movement that may be required during the courses of fire. That is what the Level II hood is for. The Tactical Games allows hip-level holsters, and bans appendix, small of back, fanny pack, and shoulder rigs.\u003c\/p\u003e\u003cp\u003eUSPSA and IDPA pistol matches are stricter. Both limit how far the holster can sit out from your belt or body, and USPSA sets that limit by division. Measure your setup against the rulebook for the match and division you shoot before gear check.\u003c\/p\u003e\u003cp\u003eThe open, tapered muzzle clears threaded barrels and compensators. Cut to accept slide-mounted optics and suppressor height sights.\u003c\/p\u003e\u003cp\u003eRight-hand draw. Holster shell in Black or Carbon Fiber, Quick Mount attachment in black. Lifetime warranty against cracks and defects. Free US shipping, same-day dispatch on orders placed before 2 PM EST.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCompatible Model(s):\u003c\/strong\u003e\u003cspan\u003e Sig Sauer P226 XFIVE with the Streamlight TLR-1 HLX\u003c\/span\u003e\u003c\/p\u003e","brand":"Black Scorpion Outdoor Gear","offers":[{"title":"Right-Hand Draw \/ Black","offer_id":45331152535595,"sku":"HC36-QMBK-P226X5TLR1","price":174.99,"currency_code":"USD","in_stock":true},{"title":"Right-Hand Draw \/ Carbon Fiber","offer_id":45331152568363,"sku":"HC36-QMCF-P226X5TLR1","price":179.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0122\/5696\/8763\/files\/BSG_Level_II_New_Strap_QMH_1.jpg?v=1789137812"},{"product_id":"sig-sauer-p226-xcarry-legion-tlr1-hlx-level-2-tactical-quick-mount-holster","title":"Sig Sauer P226 XCarry Legion w\/ Streamlight TLR-1 HLX Level 2 Tactical Quick Mount Holster","description":"\u003cp\u003eBuilt for shooters who move. This is the 0.093'' Level II Tactical shell on our Quick Mount belt attachment. The holster rides on your belt and comes off the attachment with the push of a button, no tools needed.\u003c\/p\u003e\u003cp\u003eRetention is a spring-loaded Level II hood. Press the button on the side of the hood and it travels forward, clear of the slide, and the pistol comes straight up. It resets on the reholster. The button sits under your thumb, not your trigger finger.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThicker shell, set once\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe shell is 0.093'' Kydex, a full gauge step up from the 0.080'' most holsters are cut from. It holds its shape better under a hard draw.\u003c\/p\u003e\u003cp\u003eThe retention hardware is riveted, not screwed. Retention is set at the bench and it stays there. Nothing to back out on a stage, nothing to lose in the bottom of a range bag. Retention is not adjustable on this build, which is the point: it is set once and it does not move.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQuick Mount attachment\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe belt attachment is machined from anodized aluminum and comes in black. It fits 1.5'' belts.\u003c\/p\u003e\u003cp\u003ePush the Quick Mount release button to take the holster off the attachment. The attachment stays on your belt, so the holster comes off and goes back on without taking your belt off.\u003c\/p\u003e\u003cp\u003eThe holster body is riveted, so there is nothing on it to loosen. Check that the belt attachment hardware is tight before you run it hard.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it's legal\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eUSPSA Multigun rules allow a holster on a belt worn at waist level, and rule 5.2.1.3.1 requires it to retain the pistol during the vigorous movement that may be required during the courses of fire. That is what the Level II hood is for. The Tactical Games allows hip-level holsters, and bans appendix, small of back, fanny pack, and shoulder rigs.\u003c\/p\u003e\u003cp\u003eUSPSA and IDPA pistol matches are stricter. Both limit how far the holster can sit out from your belt or body, and USPSA sets that limit by division. Measure your setup against the rulebook for the match and division you shoot before gear check.\u003c\/p\u003e\u003cp\u003eThe open, tapered muzzle clears threaded barrels and compensators. Cut to accept slide-mounted optics and suppressor height sights.\u003c\/p\u003e\u003cp\u003eRight-hand draw. Holster shell in Black or Carbon Fiber, Quick Mount attachment in black. Lifetime warranty against cracks and defects. Free US shipping, same-day dispatch on orders placed before 2 PM EST.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCompatible Model(s):\u003c\/strong\u003e\u003cspan\u003e Sig Sauer P226 XCarry Legion with the Streamlight TLR-1 HLX\u003c\/span\u003e\u003c\/p\u003e","brand":"Black Scorpion Outdoor Gear","offers":[{"title":"Right-Hand Draw \/ Black","offer_id":45331152633899,"sku":"HC36-QMBK-P226CARRYTLR1","price":174.99,"currency_code":"USD","in_stock":true},{"title":"Right-Hand Draw \/ Carbon Fiber","offer_id":45331152666667,"sku":"HC36-QMCF-P226CARRYTLR1","price":179.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0122\/5696\/8763\/files\/BSG_Level_II_New_Strap_QMH_1.jpg?v=1789137812"},{"product_id":"sig-sauer-p320-compact-tlr1-hlx-level-2-tactical-quick-mount-holster","title":"Sig Sauer P320 Compact w\/ Streamlight TLR-1 HLX Level 2 Tactical Quick Mount Holster","description":"\u003cp\u003eBuilt for shooters who move. This is the 0.093'' Level II Tactical shell on our Quick Mount belt attachment. The holster rides on your belt and comes off the attachment with the push of a button, no tools needed.\u003c\/p\u003e\u003cp\u003eRetention is a spring-loaded Level II hood. Press the button on the side of the hood and it travels forward, clear of the slide, and the pistol comes straight up. It resets on the reholster. The button sits under your thumb, not your trigger finger.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThicker shell, set once\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe shell is 0.093'' Kydex, a full gauge step up from the 0.080'' most holsters are cut from. It holds its shape better under a hard draw.\u003c\/p\u003e\u003cp\u003eThe retention hardware is riveted, not screwed. Retention is set at the bench and it stays there. Nothing to back out on a stage, nothing to lose in the bottom of a range bag. Retention is not adjustable on this build, which is the point: it is set once and it does not move.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQuick Mount attachment\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe belt attachment is machined from anodized aluminum and comes in black. It fits 1.5'' belts.\u003c\/p\u003e\u003cp\u003ePush the Quick Mount release button to take the holster off the attachment. The attachment stays on your belt, so the holster comes off and goes back on without taking your belt off.\u003c\/p\u003e\u003cp\u003eThe holster body is riveted, so there is nothing on it to loosen. Check that the belt attachment hardware is tight before you run it hard.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it's legal\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eUSPSA Multigun rules allow a holster on a belt worn at waist level, and rule 5.2.1.3.1 requires it to retain the pistol during the vigorous movement that may be required during the courses of fire. That is what the Level II hood is for. The Tactical Games allows hip-level holsters, and bans appendix, small of back, fanny pack, and shoulder rigs.\u003c\/p\u003e\u003cp\u003eUSPSA and IDPA pistol matches are stricter. Both limit how far the holster can sit out from your belt or body, and USPSA sets that limit by division. Measure your setup against the rulebook for the match and division you shoot before gear check.\u003c\/p\u003e\u003cp\u003eThe open, tapered muzzle clears threaded barrels and compensators. Cut to accept slide-mounted optics and suppressor height sights.\u003c\/p\u003e\u003cp\u003eRight-hand draw. Holster shell in Black or Carbon Fiber, Quick Mount attachment in black. Lifetime warranty against cracks and defects. Free US shipping, same-day dispatch on orders placed before 2 PM EST.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCompatible Model(s):\u003c\/strong\u003e\u003cspan\u003e Sig Sauer P320 Compact with the Streamlight TLR-1 HLX\u003c\/span\u003e\u003c\/p\u003e","brand":"Black Scorpion Outdoor Gear","offers":[{"title":"Right-Hand Draw \/ Black","offer_id":45331152732203,"sku":"HC36-QMBK-P320COMPTLR1","price":174.99,"currency_code":"USD","in_stock":true},{"title":"Right-Hand Draw \/ Carbon Fiber","offer_id":45331152764971,"sku":"HC36-QMCF-P320COMPTLR1","price":179.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0122\/5696\/8763\/files\/BSG_Level_II_New_Strap_QMH_1.jpg?v=1789137812"},{"product_id":"sig-sauer-p320-full-size-tlr1-hlx-level-2-tactical-quick-mount-holster","title":"Sig Sauer P320 Full Size w\/ Streamlight TLR-1 HLX Level 2 Tactical Quick Mount Holster","description":"\u003cp\u003eBuilt for shooters who move. This is the 0.093'' Level II Tactical shell on our Quick Mount belt attachment. The holster rides on your belt and comes off the attachment with the push of a button, no tools needed.\u003c\/p\u003e\u003cp\u003eRetention is a spring-loaded Level II hood. Press the button on the side of the hood and it travels forward, clear of the slide, and the pistol comes straight up. It resets on the reholster. The button sits under your thumb, not your trigger finger.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThicker shell, set once\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe shell is 0.093'' Kydex, a full gauge step up from the 0.080'' most holsters are cut from. It holds its shape better under a hard draw.\u003c\/p\u003e\u003cp\u003eThe retention hardware is riveted, not screwed. Retention is set at the bench and it stays there. Nothing to back out on a stage, nothing to lose in the bottom of a range bag. Retention is not adjustable on this build, which is the point: it is set once and it does not move.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQuick Mount attachment\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe belt attachment is machined from anodized aluminum and comes in black. It fits 1.5'' belts.\u003c\/p\u003e\u003cp\u003ePush the Quick Mount release button to take the holster off the attachment. The attachment stays on your belt, so the holster comes off and goes back on without taking your belt off.\u003c\/p\u003e\u003cp\u003eThe holster body is riveted, so there is nothing on it to loosen. Check that the belt attachment hardware is tight before you run it hard.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it's legal\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eUSPSA Multigun rules allow a holster on a belt worn at waist level, and rule 5.2.1.3.1 requires it to retain the pistol during the vigorous movement that may be required during the courses of fire. That is what the Level II hood is for. The Tactical Games allows hip-level holsters, and bans appendix, small of back, fanny pack, and shoulder rigs.\u003c\/p\u003e\u003cp\u003eUSPSA and IDPA pistol matches are stricter. Both limit how far the holster can sit out from your belt or body, and USPSA sets that limit by division. Measure your setup against the rulebook for the match and division you shoot before gear check.\u003c\/p\u003e\u003cp\u003eThe open, tapered muzzle clears threaded barrels and compensators. Cut to accept slide-mounted optics and suppressor height sights.\u003c\/p\u003e\u003cp\u003eRight-hand draw. Holster shell in Black or Carbon Fiber, Quick Mount attachment in black. Lifetime warranty against cracks and defects. Free US shipping, same-day dispatch on orders placed before 2 PM EST.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCompatible Model(s):\u003c\/strong\u003e\u003cspan\u003e Sig Sauer P320 Full Size with the Streamlight TLR-1 HLX\u003c\/span\u003e\u003c\/p\u003e","brand":"Black Scorpion Outdoor Gear","offers":[{"title":"Right-Hand Draw \/ Black","offer_id":45331152797739,"sku":"HC36-QMBK-P320X5TLR1","price":174.99,"currency_code":"USD","in_stock":true},{"title":"Right-Hand Draw \/ Carbon Fiber","offer_id":45331152830507,"sku":"HC36-QMCF-P320X5TLR1","price":179.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0122\/5696\/8763\/files\/BSG_Level_II_New_Strap_QMH_1.jpg?v=1789137812"},{"product_id":"sig-sauer-p320-xten-tlr1-hlx-level-2-tactical-quick-mount-holster","title":"Sig Sauer P320 XTEN w\/ Streamlight TLR-1 HLX Level 2 Tactical Quick Mount Holster","description":"\u003cp\u003eBuilt for shooters who move. This is the 0.093'' Level II Tactical shell on our Quick Mount belt attachment. The holster rides on your belt and comes off the attachment with the push of a button, no tools needed.\u003c\/p\u003e\u003cp\u003eRetention is a spring-loaded Level II hood. Press the button on the side of the hood and it travels forward, clear of the slide, and the pistol comes straight up. It resets on the reholster. The button sits under your thumb, not your trigger finger.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThicker shell, set once\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe shell is 0.093'' Kydex, a full gauge step up from the 0.080'' most holsters are cut from. It holds its shape better under a hard draw.\u003c\/p\u003e\u003cp\u003eThe retention hardware is riveted, not screwed. Retention is set at the bench and it stays there. Nothing to back out on a stage, nothing to lose in the bottom of a range bag. Retention is not adjustable on this build, which is the point: it is set once and it does not move.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQuick Mount attachment\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe belt attachment is machined from anodized aluminum and comes in black. It fits 1.5'' belts.\u003c\/p\u003e\u003cp\u003ePush the Quick Mount release button to take the holster off the attachment. The attachment stays on your belt, so the holster comes off and goes back on without taking your belt off.\u003c\/p\u003e\u003cp\u003eThe holster body is riveted, so there is nothing on it to loosen. Check that the belt attachment hardware is tight before you run it hard.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it's legal\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eUSPSA Multigun rules allow a holster on a belt worn at waist level, and rule 5.2.1.3.1 requires it to retain the pistol during the vigorous movement that may be required during the courses of fire. That is what the Level II hood is for. The Tactical Games allows hip-level holsters, and bans appendix, small of back, fanny pack, and shoulder rigs.\u003c\/p\u003e\u003cp\u003eUSPSA and IDPA pistol matches are stricter. Both limit how far the holster can sit out from your belt or body, and USPSA sets that limit by division. Measure your setup against the rulebook for the match and division you shoot before gear check.\u003c\/p\u003e\u003cp\u003eThe open, tapered muzzle clears threaded barrels and compensators. Cut to accept slide-mounted optics and suppressor height sights.\u003c\/p\u003e\u003cp\u003eRight-hand draw. Holster shell in Black or Carbon Fiber, Quick Mount attachment in black. Lifetime warranty against cracks and defects. Free US shipping, same-day dispatch on orders placed before 2 PM EST.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCompatible Model(s):\u003c\/strong\u003e\u003cspan\u003e Sig Sauer P320 XTEN with the Streamlight TLR-1 HLX\u003c\/span\u003e\u003c\/p\u003e","brand":"Black Scorpion Outdoor Gear","offers":[{"title":"Right-Hand Draw \/ Black","offer_id":45331152863275,"sku":"HC36-QMBK-P320TENTLR1","price":174.99,"currency_code":"USD","in_stock":true},{"title":"Right-Hand Draw \/ Carbon Fiber","offer_id":45331152896043,"sku":"HC36-QMCF-P320TENTLR1","price":179.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0122\/5696\/8763\/files\/BSG_Level_II_New_Strap_QMH_1.jpg?v=1789137812"},{"product_id":"smith-wesson-mp-5-7-tlr1-hlx-level-2-tactical-quick-mount-holster","title":"Smith \u0026 Wesson M\u0026P 5.7 w\/ Streamlight TLR-1 HLX Level 2 Tactical Quick Mount Holster","description":"\u003cp\u003eBuilt for shooters who move. This is the 0.093'' Level II Tactical shell on our Quick Mount belt attachment. The holster rides on your belt and comes off the attachment with the push of a button, no tools needed.\u003c\/p\u003e\u003cp\u003eRetention is a spring-loaded Level II hood. Press the button on the side of the hood and it travels forward, clear of the slide, and the pistol comes straight up. It resets on the reholster. The button sits under your thumb, not your trigger finger.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThicker shell, set once\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe shell is 0.093'' Kydex, a full gauge step up from the 0.080'' most holsters are cut from. It holds its shape better under a hard draw.\u003c\/p\u003e\u003cp\u003eThe retention hardware is riveted, not screwed. Retention is set at the bench and it stays there. Nothing to back out on a stage, nothing to lose in the bottom of a range bag. Retention is not adjustable on this build, which is the point: it is set once and it does not move.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQuick Mount attachment\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe belt attachment is machined from anodized aluminum and comes in black. It fits 1.5'' belts.\u003c\/p\u003e\u003cp\u003ePush the Quick Mount release button to take the holster off the attachment. The attachment stays on your belt, so the holster comes off and goes back on without taking your belt off.\u003c\/p\u003e\u003cp\u003eThe holster body is riveted, so there is nothing on it to loosen. Check that the belt attachment hardware is tight before you run it hard.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it's legal\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eUSPSA Multigun rules allow a holster on a belt worn at waist level, and rule 5.2.1.3.1 requires it to retain the pistol during the vigorous movement that may be required during the courses of fire. That is what the Level II hood is for. The Tactical Games allows hip-level holsters, and bans appendix, small of back, fanny pack, and shoulder rigs.\u003c\/p\u003e\u003cp\u003eUSPSA and IDPA pistol matches are stricter. Both limit how far the holster can sit out from your belt or body, and USPSA sets that limit by division. Measure your setup against the rulebook for the match and division you shoot before gear check.\u003c\/p\u003e\u003cp\u003eThe open, tapered muzzle clears threaded barrels and compensators. Cut to accept slide-mounted optics and suppressor height sights.\u003c\/p\u003e\u003cp\u003eRight-hand draw. Holster shell in Black or Carbon Fiber, Quick Mount attachment in black. Lifetime warranty against cracks and defects. Free US shipping, same-day dispatch on orders placed before 2 PM EST.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCompatible Model(s):\u003c\/strong\u003e\u003cspan\u003e Smith \u0026amp; Wesson M\u0026amp;P 5.7 with the Streamlight TLR-1 HLX\u003c\/span\u003e\u003c\/p\u003e","brand":"Black Scorpion Outdoor Gear","offers":[{"title":"Right-Hand Draw \/ Black","offer_id":45331152928811,"sku":"HC36-QMBK-MP57TLR1","price":174.99,"currency_code":"USD","in_stock":true},{"title":"Right-Hand Draw \/ Carbon Fiber","offer_id":45331152961579,"sku":"HC36-QMCF-MP57TLR1","price":179.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0122\/5696\/8763\/files\/BSG_Level_II_New_Strap_QMH_1.jpg?v=1789137812"},{"product_id":"smith-wesson-mp9-4-25-tlr1-hlx-level-2-tactical-quick-mount-holster","title":"Smith \u0026 Wesson M\u0026P9 4.25'' w\/ Streamlight TLR-1 HLX Level 2 Tactical Quick Mount Holster","description":"\u003cp\u003eBuilt for shooters who move. This is the 0.093'' Level II Tactical shell on our Quick Mount belt attachment. The holster rides on your belt and comes off the attachment with the push of a button, no tools needed.\u003c\/p\u003e\u003cp\u003eRetention is a spring-loaded Level II hood. Press the button on the side of the hood and it travels forward, clear of the slide, and the pistol comes straight up. It resets on the reholster. The button sits under your thumb, not your trigger finger.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThicker shell, set once\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe shell is 0.093'' Kydex, a full gauge step up from the 0.080'' most holsters are cut from. It holds its shape better under a hard draw.\u003c\/p\u003e\u003cp\u003eThe retention hardware is riveted, not screwed. Retention is set at the bench and it stays there. Nothing to back out on a stage, nothing to lose in the bottom of a range bag. Retention is not adjustable on this build, which is the point: it is set once and it does not move.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQuick Mount attachment\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe belt attachment is machined from anodized aluminum and comes in black. It fits 1.5'' belts.\u003c\/p\u003e\u003cp\u003ePush the Quick Mount release button to take the holster off the attachment. The attachment stays on your belt, so the holster comes off and goes back on without taking your belt off.\u003c\/p\u003e\u003cp\u003eThe holster body is riveted, so there is nothing on it to loosen. Check that the belt attachment hardware is tight before you run it hard.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it's legal\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eUSPSA Multigun rules allow a holster on a belt worn at waist level, and rule 5.2.1.3.1 requires it to retain the pistol during the vigorous movement that may be required during the courses of fire. That is what the Level II hood is for. The Tactical Games allows hip-level holsters, and bans appendix, small of back, fanny pack, and shoulder rigs.\u003c\/p\u003e\u003cp\u003eUSPSA and IDPA pistol matches are stricter. Both limit how far the holster can sit out from your belt or body, and USPSA sets that limit by division. Measure your setup against the rulebook for the match and division you shoot before gear check.\u003c\/p\u003e\u003cp\u003eThe open, tapered muzzle clears threaded barrels and compensators. Cut to accept slide-mounted optics and suppressor height sights.\u003c\/p\u003e\u003cp\u003eRight-hand draw. Holster shell in Black or Carbon Fiber, Quick Mount attachment in black. Lifetime warranty against cracks and defects. Free US shipping, same-day dispatch on orders placed before 2 PM EST.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCompatible Model(s):\u003c\/strong\u003e\u003cspan\u003e Smith \u0026amp; Wesson M\u0026amp;P9 4.25'' with the Streamlight TLR-1 HLX\u003c\/span\u003e\u003c\/p\u003e","brand":"Black Scorpion Outdoor Gear","offers":[{"title":"Right-Hand Draw \/ Black","offer_id":45331153027115,"sku":"HC36-QMBK-MP94TLR1","price":174.99,"currency_code":"USD","in_stock":true},{"title":"Right-Hand Draw \/ Carbon Fiber","offer_id":45331153059883,"sku":"HC36-QMCF-MP94TLR1","price":179.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0122\/5696\/8763\/files\/BSG_Level_II_New_Strap_QMH_1.jpg?v=1789137812"},{"product_id":"smith-wesson-mp9-5-tlr1-hlx-level-2-tactical-quick-mount-holster","title":"Smith \u0026 Wesson M\u0026P9 5'' w\/ Streamlight TLR-1 HLX Level 2 Tactical Quick Mount Holster","description":"\u003cp\u003eBuilt for shooters who move. This is the 0.093'' Level II Tactical shell on our Quick Mount belt attachment. The holster rides on your belt and comes off the attachment with the push of a button, no tools needed.\u003c\/p\u003e\u003cp\u003eRetention is a spring-loaded Level II hood. Press the button on the side of the hood and it travels forward, clear of the slide, and the pistol comes straight up. It resets on the reholster. The button sits under your thumb, not your trigger finger.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThicker shell, set once\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe shell is 0.093'' Kydex, a full gauge step up from the 0.080'' most holsters are cut from. It holds its shape better under a hard draw.\u003c\/p\u003e\u003cp\u003eThe retention hardware is riveted, not screwed. Retention is set at the bench and it stays there. Nothing to back out on a stage, nothing to lose in the bottom of a range bag. Retention is not adjustable on this build, which is the point: it is set once and it does not move.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQuick Mount attachment\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe belt attachment is machined from anodized aluminum and comes in black. It fits 1.5'' belts.\u003c\/p\u003e\u003cp\u003ePush the Quick Mount release button to take the holster off the attachment. The attachment stays on your belt, so the holster comes off and goes back on without taking your belt off.\u003c\/p\u003e\u003cp\u003eThe holster body is riveted, so there is nothing on it to loosen. Check that the belt attachment hardware is tight before you run it hard.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it's legal\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eUSPSA Multigun rules allow a holster on a belt worn at waist level, and rule 5.2.1.3.1 requires it to retain the pistol during the vigorous movement that may be required during the courses of fire. That is what the Level II hood is for. The Tactical Games allows hip-level holsters, and bans appendix, small of back, fanny pack, and shoulder rigs.\u003c\/p\u003e\u003cp\u003eUSPSA and IDPA pistol matches are stricter. Both limit how far the holster can sit out from your belt or body, and USPSA sets that limit by division. Measure your setup against the rulebook for the match and division you shoot before gear check.\u003c\/p\u003e\u003cp\u003eThe open, tapered muzzle clears threaded barrels and compensators. Cut to accept slide-mounted optics and suppressor height sights.\u003c\/p\u003e\u003cp\u003eRight-hand draw. Holster shell in Black or Carbon Fiber, Quick Mount attachment in black. Lifetime warranty against cracks and defects. Free US shipping, same-day dispatch on orders placed before 2 PM EST.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCompatible Model(s):\u003c\/strong\u003e\u003cspan\u003e Smith \u0026amp; Wesson M\u0026amp;P9 5'' with the Streamlight TLR-1 HLX\u003c\/span\u003e\u003c\/p\u003e","brand":"Black Scorpion Outdoor Gear","offers":[{"title":"Right-Hand Draw \/ Black","offer_id":45331153158187,"sku":"HC36-QMBK-MP5TLR1","price":174.99,"currency_code":"USD","in_stock":true},{"title":"Right-Hand Draw \/ Carbon Fiber","offer_id":45331153190955,"sku":"HC36-QMCF-MP5TLR1","price":179.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0122\/5696\/8763\/files\/BSG_Level_II_New_Strap_QMH_1.jpg?v=1789137812"},{"product_id":"smith-wesson-mp9-m2-0-metal-hd-tlr1-hlx-level-2-tactical-quick-mount-holster","title":"Smith \u0026 Wesson M\u0026P9 M2.0 Metal HD w\/ Streamlight TLR-1 HLX Level 2 Tactical Quick Mount Holster","description":"\u003cp\u003eBuilt for shooters who move. This is the 0.093'' Level II Tactical shell on our Quick Mount belt attachment. The holster rides on your belt and comes off the attachment with the push of a button, no tools needed.\u003c\/p\u003e\u003cp\u003eRetention is a spring-loaded Level II hood. Press the button on the side of the hood and it travels forward, clear of the slide, and the pistol comes straight up. It resets on the reholster. The button sits under your thumb, not your trigger finger.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThicker shell, set once\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe shell is 0.093'' Kydex, a full gauge step up from the 0.080'' most holsters are cut from. It holds its shape better under a hard draw.\u003c\/p\u003e\u003cp\u003eThe retention hardware is riveted, not screwed. Retention is set at the bench and it stays there. Nothing to back out on a stage, nothing to lose in the bottom of a range bag. Retention is not adjustable on this build, which is the point: it is set once and it does not move.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQuick Mount attachment\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe belt attachment is machined from anodized aluminum and comes in black. It fits 1.5'' belts.\u003c\/p\u003e\u003cp\u003ePush the Quick Mount release button to take the holster off the attachment. The attachment stays on your belt, so the holster comes off and goes back on without taking your belt off.\u003c\/p\u003e\u003cp\u003eThe holster body is riveted, so there is nothing on it to loosen. Check that the belt attachment hardware is tight before you run it hard.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it's legal\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eUSPSA Multigun rules allow a holster on a belt worn at waist level, and rule 5.2.1.3.1 requires it to retain the pistol during the vigorous movement that may be required during the courses of fire. That is what the Level II hood is for. The Tactical Games allows hip-level holsters, and bans appendix, small of back, fanny pack, and shoulder rigs.\u003c\/p\u003e\u003cp\u003eUSPSA and IDPA pistol matches are stricter. Both limit how far the holster can sit out from your belt or body, and USPSA sets that limit by division. Measure your setup against the rulebook for the match and division you shoot before gear check.\u003c\/p\u003e\u003cp\u003eThe open, tapered muzzle clears threaded barrels and compensators. Cut to accept slide-mounted optics and suppressor height sights.\u003c\/p\u003e\u003cp\u003eRight-hand draw. Holster shell in Black or Carbon Fiber, Quick Mount attachment in black. Lifetime warranty against cracks and defects. Free US shipping, same-day dispatch on orders placed before 2 PM EST.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCompatible Model(s):\u003c\/strong\u003e\u003cspan\u003e Smith \u0026amp; Wesson M\u0026amp;P9 M2.0 Metal HD with the Streamlight TLR-1 HLX\u003c\/span\u003e\u003c\/p\u003e","brand":"Black Scorpion Outdoor Gear","offers":[{"title":"Right-Hand Draw \/ Black","offer_id":45331153256491,"sku":"HC36-QMBK-METALTLR1","price":174.99,"currency_code":"USD","in_stock":true},{"title":"Right-Hand Draw \/ Carbon Fiber","offer_id":45331153289259,"sku":"HC36-QMCF-METALTLR1","price":179.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0122\/5696\/8763\/files\/BSG_Level_II_New_Strap_QMH_1.jpg?v=1789137812"},{"product_id":"springfield-armory-echelon-4-0c-tlr1-hlx-level-2-tactical-quick-mount-holster","title":"Springfield Armory Echelon 4.0C w\/ Streamlight TLR-1 HLX Level 2 Tactical Quick Mount Holster","description":"\u003cp\u003eBuilt for shooters who move. This is the 0.093'' Level II Tactical shell on our Quick Mount belt attachment. The holster rides on your belt and comes off the attachment with the push of a button, no tools needed.\u003c\/p\u003e\u003cp\u003eRetention is a spring-loaded Level II hood. Press the button on the side of the hood and it travels forward, clear of the slide, and the pistol comes straight up. It resets on the reholster. The button sits under your thumb, not your trigger finger.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThicker shell, set once\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe shell is 0.093'' Kydex, a full gauge step up from the 0.080'' most holsters are cut from. It holds its shape better under a hard draw.\u003c\/p\u003e\u003cp\u003eThe retention hardware is riveted, not screwed. Retention is set at the bench and it stays there. Nothing to back out on a stage, nothing to lose in the bottom of a range bag. Retention is not adjustable on this build, which is the point: it is set once and it does not move.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQuick Mount attachment\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe belt attachment is machined from anodized aluminum and comes in black. It fits 1.5'' belts.\u003c\/p\u003e\u003cp\u003ePush the Quick Mount release button to take the holster off the attachment. The attachment stays on your belt, so the holster comes off and goes back on without taking your belt off.\u003c\/p\u003e\u003cp\u003eThe holster body is riveted, so there is nothing on it to loosen. Check that the belt attachment hardware is tight before you run it hard.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it's legal\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eUSPSA Multigun rules allow a holster on a belt worn at waist level, and rule 5.2.1.3.1 requires it to retain the pistol during the vigorous movement that may be required during the courses of fire. That is what the Level II hood is for. The Tactical Games allows hip-level holsters, and bans appendix, small of back, fanny pack, and shoulder rigs.\u003c\/p\u003e\u003cp\u003eUSPSA and IDPA pistol matches are stricter. Both limit how far the holster can sit out from your belt or body, and USPSA sets that limit by division. Measure your setup against the rulebook for the match and division you shoot before gear check.\u003c\/p\u003e\u003cp\u003eThe open, tapered muzzle clears threaded barrels and compensators. Cut to accept slide-mounted optics and suppressor height sights.\u003c\/p\u003e\u003cp\u003eRight-hand draw. Holster shell in Black or Carbon Fiber, Quick Mount attachment in black. Lifetime warranty against cracks and defects. Free US shipping, same-day dispatch on orders placed before 2 PM EST.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCompatible Model(s):\u003c\/strong\u003e\u003cspan\u003e Springfield Armory Echelon 4.0C with the Streamlight TLR-1 HLX\u003c\/span\u003e\u003c\/p\u003e","brand":"Black Scorpion Outdoor Gear","offers":[{"title":"Right-Hand Draw \/ Black","offer_id":45331153322027,"sku":"HC36-QMBK-ECHELON4CTLR1","price":174.99,"currency_code":"USD","in_stock":true},{"title":"Right-Hand Draw \/ Carbon Fiber","offer_id":45331153354795,"sku":"HC36-QMCF-ECHELON4CTLR1","price":179.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0122\/5696\/8763\/files\/BSG_Level_II_New_Strap_QMH_1.jpg?v=1789137812"},{"product_id":"springfield-armory-echelon-4-5-tlr1-hlx-level-2-tactical-quick-mount-holster","title":"Springfield Armory Echelon 4.5'' w\/ Streamlight TLR-1 HLX Level 2 Tactical Quick Mount Holster","description":"\u003cp\u003eBuilt for shooters who move. This is the 0.093'' Level II Tactical shell on our Quick Mount belt attachment. The holster rides on your belt and comes off the attachment with the push of a button, no tools needed.\u003c\/p\u003e\u003cp\u003eRetention is a spring-loaded Level II hood. Press the button on the side of the hood and it travels forward, clear of the slide, and the pistol comes straight up. It resets on the reholster. The button sits under your thumb, not your trigger finger.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThicker shell, set once\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe shell is 0.093'' Kydex, a full gauge step up from the 0.080'' most holsters are cut from. It holds its shape better under a hard draw.\u003c\/p\u003e\u003cp\u003eThe retention hardware is riveted, not screwed. Retention is set at the bench and it stays there. Nothing to back out on a stage, nothing to lose in the bottom of a range bag. Retention is not adjustable on this build, which is the point: it is set once and it does not move.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQuick Mount attachment\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe belt attachment is machined from anodized aluminum and comes in black. It fits 1.5'' belts.\u003c\/p\u003e\u003cp\u003ePush the Quick Mount release button to take the holster off the attachment. The attachment stays on your belt, so the holster comes off and goes back on without taking your belt off.\u003c\/p\u003e\u003cp\u003eThe holster body is riveted, so there is nothing on it to loosen. Check that the belt attachment hardware is tight before you run it hard.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it's legal\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eUSPSA Multigun rules allow a holster on a belt worn at waist level, and rule 5.2.1.3.1 requires it to retain the pistol during the vigorous movement that may be required during the courses of fire. That is what the Level II hood is for. The Tactical Games allows hip-level holsters, and bans appendix, small of back, fanny pack, and shoulder rigs.\u003c\/p\u003e\u003cp\u003eUSPSA and IDPA pistol matches are stricter. Both limit how far the holster can sit out from your belt or body, and USPSA sets that limit by division. Measure your setup against the rulebook for the match and division you shoot before gear check.\u003c\/p\u003e\u003cp\u003eThe open, tapered muzzle clears threaded barrels and compensators. Cut to accept slide-mounted optics and suppressor height sights.\u003c\/p\u003e\u003cp\u003eRight-hand draw. Holster shell in Black or Carbon Fiber, Quick Mount attachment in black. Lifetime warranty against cracks and defects. Free US shipping, same-day dispatch on orders placed before 2 PM EST.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCompatible Model(s):\u003c\/strong\u003e\u003cspan\u003e Springfield Armory Echelon 4.5'' with the Streamlight TLR-1 HLX\u003c\/span\u003e\u003c\/p\u003e","brand":"Black Scorpion Outdoor Gear","offers":[{"title":"Right-Hand Draw \/ Black","offer_id":45331153420331,"sku":"HC36-QMBK-ECHE45TLR1","price":174.99,"currency_code":"USD","in_stock":true},{"title":"Right-Hand Draw \/ Carbon Fiber","offer_id":45331153453099,"sku":"HC36-QMCF-ECHE45TLR1","price":179.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0122\/5696\/8763\/files\/BSG_Level_II_New_Strap_QMH_1.jpg?v=1789137812"},{"product_id":"springfield-armory-xd-m-elite-4-5-tlr1-hlx-level-2-tactical-quick-mount-holster","title":"Springfield Armory XD-M Elite 4.5'' w\/ Streamlight TLR-1 HLX Level 2 Tactical Quick Mount Holster","description":"\u003cp\u003eBuilt for shooters who move. This is the 0.093'' Level II Tactical shell on our Quick Mount belt attachment. The holster rides on your belt and comes off the attachment with the push of a button, no tools needed.\u003c\/p\u003e\u003cp\u003eRetention is a spring-loaded Level II hood. Press the button on the side of the hood and it travels forward, clear of the slide, and the pistol comes straight up. It resets on the reholster. The button sits under your thumb, not your trigger finger.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThicker shell, set once\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe shell is 0.093'' Kydex, a full gauge step up from the 0.080'' most holsters are cut from. It holds its shape better under a hard draw.\u003c\/p\u003e\u003cp\u003eThe retention hardware is riveted, not screwed. Retention is set at the bench and it stays there. Nothing to back out on a stage, nothing to lose in the bottom of a range bag. Retention is not adjustable on this build, which is the point: it is set once and it does not move.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQuick Mount attachment\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe belt attachment is machined from anodized aluminum and comes in black. It fits 1.5'' belts.\u003c\/p\u003e\u003cp\u003ePush the Quick Mount release button to take the holster off the attachment. The attachment stays on your belt, so the holster comes off and goes back on without taking your belt off.\u003c\/p\u003e\u003cp\u003eThe holster body is riveted, so there is nothing on it to loosen. Check that the belt attachment hardware is tight before you run it hard.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it's legal\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eUSPSA Multigun rules allow a holster on a belt worn at waist level, and rule 5.2.1.3.1 requires it to retain the pistol during the vigorous movement that may be required during the courses of fire. That is what the Level II hood is for. The Tactical Games allows hip-level holsters, and bans appendix, small of back, fanny pack, and shoulder rigs.\u003c\/p\u003e\u003cp\u003eUSPSA and IDPA pistol matches are stricter. Both limit how far the holster can sit out from your belt or body, and USPSA sets that limit by division. Measure your setup against the rulebook for the match and division you shoot before gear check.\u003c\/p\u003e\u003cp\u003eThe open, tapered muzzle clears threaded barrels and compensators. Cut to accept slide-mounted optics and suppressor height sights.\u003c\/p\u003e\u003cp\u003eRight-hand draw. Holster shell in Black or Carbon Fiber, Quick Mount attachment in black. Lifetime warranty against cracks and defects. Free US shipping, same-day dispatch on orders placed before 2 PM EST.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCompatible Model(s):\u003c\/strong\u003e\u003cspan\u003e Springfield Armory XD-M Elite 4.5'' with the Streamlight TLR-1 HLX\u003c\/span\u003e\u003c\/p\u003e","brand":"Black Scorpion Outdoor Gear","offers":[{"title":"Right-Hand Draw \/ Black","offer_id":45331153518635,"sku":"HC36-QMBK-XDM45TLR1","price":174.99,"currency_code":"USD","in_stock":true},{"title":"Right-Hand Draw \/ Carbon Fiber","offer_id":45331153551403,"sku":"HC36-QMCF-XDM45TLR1","price":179.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0122\/5696\/8763\/files\/BSG_Level_II_New_Strap_QMH_1.jpg?v=1789137812"},{"product_id":"stoeger-str-9-combat-sx-tlr1-hlx-level-2-tactical-quick-mount-holster","title":"Stoeger STR-9 Combat SX w\/ Streamlight TLR-1 HLX Level 2 Tactical Quick Mount Holster","description":"\u003cp\u003eBuilt for shooters who move. This is the 0.093'' Level II Tactical shell on our Quick Mount belt attachment. The holster rides on your belt and comes off the attachment with the push of a button, no tools needed.\u003c\/p\u003e\u003cp\u003eRetention is a spring-loaded Level II hood. Press the button on the side of the hood and it travels forward, clear of the slide, and the pistol comes straight up. It resets on the reholster. The button sits under your thumb, not your trigger finger.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThicker shell, set once\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe shell is 0.093'' Kydex, a full gauge step up from the 0.080'' most holsters are cut from. It holds its shape better under a hard draw.\u003c\/p\u003e\u003cp\u003eThe retention hardware is riveted, not screwed. Retention is set at the bench and it stays there. Nothing to back out on a stage, nothing to lose in the bottom of a range bag. Retention is not adjustable on this build, which is the point: it is set once and it does not move.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQuick Mount attachment\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe belt attachment is machined from anodized aluminum and comes in black. It fits 1.5'' belts.\u003c\/p\u003e\u003cp\u003ePush the Quick Mount release button to take the holster off the attachment. The attachment stays on your belt, so the holster comes off and goes back on without taking your belt off.\u003c\/p\u003e\u003cp\u003eThe holster body is riveted, so there is nothing on it to loosen. Check that the belt attachment hardware is tight before you run it hard.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it's legal\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eUSPSA Multigun rules allow a holster on a belt worn at waist level, and rule 5.2.1.3.1 requires it to retain the pistol during the vigorous movement that may be required during the courses of fire. That is what the Level II hood is for. The Tactical Games allows hip-level holsters, and bans appendix, small of back, fanny pack, and shoulder rigs.\u003c\/p\u003e\u003cp\u003eUSPSA and IDPA pistol matches are stricter. Both limit how far the holster can sit out from your belt or body, and USPSA sets that limit by division. Measure your setup against the rulebook for the match and division you shoot before gear check.\u003c\/p\u003e\u003cp\u003eThe open, tapered muzzle clears threaded barrels and compensators. Cut to accept slide-mounted optics and suppressor height sights.\u003c\/p\u003e\u003cp\u003eRight-hand draw. Holster shell in Black or Carbon Fiber, Quick Mount attachment in black. Lifetime warranty against cracks and defects. Free US shipping, same-day dispatch on orders placed before 2 PM EST.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCompatible Model(s):\u003c\/strong\u003e\u003cspan\u003e Stoeger STR-9 Combat SX with the Streamlight TLR-1 HLX\u003c\/span\u003e\u003c\/p\u003e","brand":"Black Scorpion Outdoor Gear","offers":[{"title":"Right-Hand Draw \/ Black","offer_id":45331153616939,"sku":"HC36-QMBK-COMBATSXTLR1","price":174.99,"currency_code":"USD","in_stock":true},{"title":"Right-Hand Draw \/ Carbon Fiber","offer_id":45331153649707,"sku":"HC36-QMCF-COMBATSXTLR1","price":179.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0122\/5696\/8763\/files\/BSG_Level_II_New_Strap_QMH_1.jpg?v=1789137812"},{"product_id":"walther-pdp-5-tlr1-hlx-level-2-tactical-quick-mount-holster","title":"Walther PDP 5'' w\/ Streamlight TLR-1 HLX Level 2 Tactical Quick Mount Holster","description":"\u003cp\u003eBuilt for shooters who move. This is the 0.093'' Level II Tactical shell on our Quick Mount belt attachment. The holster rides on your belt and comes off the attachment with the push of a button, no tools needed.\u003c\/p\u003e\u003cp\u003eRetention is a spring-loaded Level II hood. Press the button on the side of the hood and it travels forward, clear of the slide, and the pistol comes straight up. It resets on the reholster. The button sits under your thumb, not your trigger finger.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThicker shell, set once\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe shell is 0.093'' Kydex, a full gauge step up from the 0.080'' most holsters are cut from. It holds its shape better under a hard draw.\u003c\/p\u003e\u003cp\u003eThe retention hardware is riveted, not screwed. Retention is set at the bench and it stays there. Nothing to back out on a stage, nothing to lose in the bottom of a range bag. Retention is not adjustable on this build, which is the point: it is set once and it does not move.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQuick Mount attachment\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe belt attachment is machined from anodized aluminum and comes in black. It fits 1.5'' belts.\u003c\/p\u003e\u003cp\u003ePush the Quick Mount release button to take the holster off the attachment. The attachment stays on your belt, so the holster comes off and goes back on without taking your belt off.\u003c\/p\u003e\u003cp\u003eThe holster body is riveted, so there is nothing on it to loosen. Check that the belt attachment hardware is tight before you run it hard.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it's legal\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eUSPSA Multigun rules allow a holster on a belt worn at waist level, and rule 5.2.1.3.1 requires it to retain the pistol during the vigorous movement that may be required during the courses of fire. That is what the Level II hood is for. The Tactical Games allows hip-level holsters, and bans appendix, small of back, fanny pack, and shoulder rigs.\u003c\/p\u003e\u003cp\u003eUSPSA and IDPA pistol matches are stricter. Both limit how far the holster can sit out from your belt or body, and USPSA sets that limit by division. Measure your setup against the rulebook for the match and division you shoot before gear check.\u003c\/p\u003e\u003cp\u003eThe open, tapered muzzle clears threaded barrels and compensators. Cut to accept slide-mounted optics and suppressor height sights.\u003c\/p\u003e\u003cp\u003eRight-hand draw. Holster shell in Black or Carbon Fiber, Quick Mount attachment in black. Lifetime warranty against cracks and defects. Free US shipping, same-day dispatch on orders placed before 2 PM EST.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCompatible Model(s):\u003c\/strong\u003e\u003cspan\u003e Walther PDP 5'' with the Streamlight TLR-1 HLX\u003c\/span\u003e\u003c\/p\u003e","brand":"Black Scorpion Outdoor Gear","offers":[{"title":"Right-Hand Draw \/ Black","offer_id":45331153813547,"sku":"HC36-QMBK-PDP5TLR1","price":174.99,"currency_code":"USD","in_stock":true},{"title":"Right-Hand Draw \/ Carbon Fiber","offer_id":45331153846315,"sku":"HC36-QMCF-PDP5TLR1","price":179.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0122\/5696\/8763\/files\/BSG_Level_II_New_Strap_QMH_1.jpg?v=1789137812"},{"product_id":"walther-q5-match-sf-tlr1-hlx-level-2-tactical-quick-mount-holster","title":"Walther Q5 Match SF w\/ Streamlight TLR-1 HLX Level 2 Tactical Quick Mount Holster","description":"\u003cp\u003eBuilt for shooters who move. This is the 0.093'' Level II Tactical shell on our Quick Mount belt attachment. The holster rides on your belt and comes off the attachment with the push of a button, no tools needed.\u003c\/p\u003e\u003cp\u003eRetention is a spring-loaded Level II hood. Press the button on the side of the hood and it travels forward, clear of the slide, and the pistol comes straight up. It resets on the reholster. The button sits under your thumb, not your trigger finger.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThicker shell, set once\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe shell is 0.093'' Kydex, a full gauge step up from the 0.080'' most holsters are cut from. It holds its shape better under a hard draw.\u003c\/p\u003e\u003cp\u003eThe retention hardware is riveted, not screwed. Retention is set at the bench and it stays there. Nothing to back out on a stage, nothing to lose in the bottom of a range bag. Retention is not adjustable on this build, which is the point: it is set once and it does not move.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQuick Mount attachment\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe belt attachment is machined from anodized aluminum and comes in black. It fits 1.5'' belts.\u003c\/p\u003e\u003cp\u003ePush the Quick Mount release button to take the holster off the attachment. The attachment stays on your belt, so the holster comes off and goes back on without taking your belt off.\u003c\/p\u003e\u003cp\u003eThe holster body is riveted, so there is nothing on it to loosen. Check that the belt attachment hardware is tight before you run it hard.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it's legal\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eUSPSA Multigun rules allow a holster on a belt worn at waist level, and rule 5.2.1.3.1 requires it to retain the pistol during the vigorous movement that may be required during the courses of fire. That is what the Level II hood is for. The Tactical Games allows hip-level holsters, and bans appendix, small of back, fanny pack, and shoulder rigs.\u003c\/p\u003e\u003cp\u003eUSPSA and IDPA pistol matches are stricter. Both limit how far the holster can sit out from your belt or body, and USPSA sets that limit by division. Measure your setup against the rulebook for the match and division you shoot before gear check.\u003c\/p\u003e\u003cp\u003eThe open, tapered muzzle clears threaded barrels and compensators. Cut to accept slide-mounted optics and suppressor height sights.\u003c\/p\u003e\u003cp\u003eRight-hand draw. Holster shell in Black or Carbon Fiber, Quick Mount attachment in black. Lifetime warranty against cracks and defects. Free US shipping, same-day dispatch on orders placed before 2 PM EST.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCompatible Model(s):\u003c\/strong\u003e\u003cspan\u003e Walther Q5 Match SF with the Streamlight TLR-1 HLX\u003c\/span\u003e\u003c\/p\u003e","brand":"Black Scorpion Outdoor Gear","offers":[{"title":"Right-Hand Draw \/ Black","offer_id":45331153879083,"sku":"HC36-QMBK-Q5SFTLR1","price":174.99,"currency_code":"USD","in_stock":true},{"title":"Right-Hand Draw \/ Carbon Fiber","offer_id":45331153911851,"sku":"HC36-QMCF-Q5SFTLR1","price":179.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0122\/5696\/8763\/files\/BSG_Level_II_New_Strap_QMH_1.jpg?v=1789137812"},{"product_id":"beretta-94x-performance-x300-level-2-tactical-quick-mount-holster","title":"Beretta 94X Performance w\/ SureFire X300U-A\/B Level 2 Tactical Quick Mount Holster","description":"\u003cp\u003eBuilt for shooters who move. This is the 0.093'' Level II Tactical shell on our Quick Mount belt attachment. The holster rides on your belt and comes off the attachment with the push of a button, no tools needed.\u003c\/p\u003e\u003cp\u003eRetention is a spring-loaded Level II hood. Press the button on the side of the hood and it travels forward, clear of the slide, and the pistol comes straight up. It resets on the reholster. The button sits under your thumb, not your trigger finger.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThicker shell, set once\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe shell is 0.093'' Kydex, a full gauge step up from the 0.080'' most holsters are cut from. It holds its shape better under a hard draw.\u003c\/p\u003e\u003cp\u003eThe retention hardware is riveted, not screwed. Retention is set at the bench and it stays there. Nothing to back out on a stage, nothing to lose in the bottom of a range bag. Retention is not adjustable on this build, which is the point: it is set once and it does not move.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQuick Mount attachment\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe belt attachment is machined from anodized aluminum and comes in black. It fits 1.5'' belts.\u003c\/p\u003e\u003cp\u003ePush the Quick Mount release button to take the holster off the attachment. The attachment stays on your belt, so the holster comes off and goes back on without taking your belt off.\u003c\/p\u003e\u003cp\u003eThe holster body is riveted, so there is nothing on it to loosen. Check that the belt attachment hardware is tight before you run it hard.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it's legal\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eUSPSA Multigun rules allow a holster on a belt worn at waist level, and rule 5.2.1.3.1 requires it to retain the pistol during the vigorous movement that may be required during the courses of fire. That is what the Level II hood is for. The Tactical Games allows hip-level holsters, and bans appendix, small of back, fanny pack, and shoulder rigs.\u003c\/p\u003e\u003cp\u003eUSPSA and IDPA pistol matches are stricter. Both limit how far the holster can sit out from your belt or body, and USPSA sets that limit by division. Measure your setup against the rulebook for the match and division you shoot before gear check.\u003c\/p\u003e\u003cp\u003eThe open, tapered muzzle clears threaded barrels and compensators. Cut to accept slide-mounted optics and suppressor height sights.\u003c\/p\u003e\u003cp\u003eRight-hand draw. Holster shell in Black or Carbon Fiber, Quick Mount attachment in black. Lifetime warranty against cracks and defects. Free US shipping, same-day dispatch on orders placed before 2 PM EST.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCompatible Model(s):\u003c\/strong\u003e\u003cspan\u003e Beretta 94X Performance with the SureFire X300U-A\/B\u003c\/span\u003e\u003c\/p\u003e","brand":"Black Scorpion Outdoor Gear","offers":[{"title":"Right-Hand Draw \/ Black","offer_id":45331153944619,"sku":"HC36-QMX300BK-94XPERF","price":174.99,"currency_code":"USD","in_stock":true},{"title":"Right-Hand Draw \/ Carbon Fiber","offer_id":45331153977387,"sku":"HC36-QMX300CF-94XPERF","price":179.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0122\/5696\/8763\/files\/BSG_Level_II_New_Strap_QMH_1.jpg?v=1789137812"},{"product_id":"bersa-m2xi-x300-level-2-tactical-quick-mount-holster","title":"Bersa M2XI w\/ SureFire X300U-A\/B Level 2 Tactical Quick Mount Holster","description":"\u003cp\u003eBuilt for shooters who move. This is the 0.093'' Level II Tactical shell on our Quick Mount belt attachment. The holster rides on your belt and comes off the attachment with the push of a button, no tools needed.\u003c\/p\u003e\u003cp\u003eRetention is a spring-loaded Level II hood. Press the button on the side of the hood and it travels forward, clear of the slide, and the pistol comes straight up. It resets on the reholster. The button sits under your thumb, not your trigger finger.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThicker shell, set once\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe shell is 0.093'' Kydex, a full gauge step up from the 0.080'' most holsters are cut from. It holds its shape better under a hard draw.\u003c\/p\u003e\u003cp\u003eThe retention hardware is riveted, not screwed. Retention is set at the bench and it stays there. Nothing to back out on a stage, nothing to lose in the bottom of a range bag. Retention is not adjustable on this build, which is the point: it is set once and it does not move.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQuick Mount attachment\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe belt attachment is machined from anodized aluminum and comes in black. It fits 1.5'' belts.\u003c\/p\u003e\u003cp\u003ePush the Quick Mount release button to take the holster off the attachment. The attachment stays on your belt, so the holster comes off and goes back on without taking your belt off.\u003c\/p\u003e\u003cp\u003eThe holster body is riveted, so there is nothing on it to loosen. Check that the belt attachment hardware is tight before you run it hard.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it's legal\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eUSPSA Multigun rules allow a holster on a belt worn at waist level, and rule 5.2.1.3.1 requires it to retain the pistol during the vigorous movement that may be required during the courses of fire. That is what the Level II hood is for. The Tactical Games allows hip-level holsters, and bans appendix, small of back, fanny pack, and shoulder rigs.\u003c\/p\u003e\u003cp\u003eUSPSA and IDPA pistol matches are stricter. Both limit how far the holster can sit out from your belt or body, and USPSA sets that limit by division. Measure your setup against the rulebook for the match and division you shoot before gear check.\u003c\/p\u003e\u003cp\u003eThe open, tapered muzzle clears threaded barrels and compensators. Cut to accept slide-mounted optics and suppressor height sights.\u003c\/p\u003e\u003cp\u003eRight-hand draw. Holster shell in Black or Carbon Fiber, Quick Mount attachment in black. Lifetime warranty against cracks and defects. Free US shipping, same-day dispatch on orders placed before 2 PM EST.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCompatible Model(s):\u003c\/strong\u003e\u003cspan\u003e Bersa M2XI with the SureFire X300U-A\/B\u003c\/span\u003e\u003c\/p\u003e","brand":"Black Scorpion Outdoor Gear","offers":[{"title":"Right-Hand Draw \/ Black","offer_id":45331154042923,"sku":"HC36-QMX300BK-M2XI","price":174.99,"currency_code":"USD","in_stock":true},{"title":"Right-Hand Draw \/ Carbon Fiber","offer_id":45331154075691,"sku":"HC36-QMX300CF-M2XI","price":179.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0122\/5696\/8763\/files\/BSG_Level_II_New_Strap_QMH_1.jpg?v=1789137812"},{"product_id":"canik-tp9sfx-x300-level-2-tactical-quick-mount-holster","title":"Canik TP9SFX w\/ SureFire X300U-A\/B Level 2 Tactical Quick Mount Holster","description":"\u003cp\u003eBuilt for shooters who move. This is the 0.093'' Level II Tactical shell on our Quick Mount belt attachment. The holster rides on your belt and comes off the attachment with the push of a button, no tools needed.\u003c\/p\u003e\u003cp\u003eRetention is a spring-loaded Level II hood. Press the button on the side of the hood and it travels forward, clear of the slide, and the pistol comes straight up. It resets on the reholster. The button sits under your thumb, not your trigger finger.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThicker shell, set once\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe shell is 0.093'' Kydex, a full gauge step up from the 0.080'' most holsters are cut from. It holds its shape better under a hard draw.\u003c\/p\u003e\u003cp\u003eThe retention hardware is riveted, not screwed. Retention is set at the bench and it stays there. Nothing to back out on a stage, nothing to lose in the bottom of a range bag. Retention is not adjustable on this build, which is the point: it is set once and it does not move.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQuick Mount attachment\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe belt attachment is machined from anodized aluminum and comes in black. It fits 1.5'' belts.\u003c\/p\u003e\u003cp\u003ePush the Quick Mount release button to take the holster off the attachment. The attachment stays on your belt, so the holster comes off and goes back on without taking your belt off.\u003c\/p\u003e\u003cp\u003eThe holster body is riveted, so there is nothing on it to loosen. Check that the belt attachment hardware is tight before you run it hard.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it's legal\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eUSPSA Multigun rules allow a holster on a belt worn at waist level, and rule 5.2.1.3.1 requires it to retain the pistol during the vigorous movement that may be required during the courses of fire. That is what the Level II hood is for. The Tactical Games allows hip-level holsters, and bans appendix, small of back, fanny pack, and shoulder rigs.\u003c\/p\u003e\u003cp\u003eUSPSA and IDPA pistol matches are stricter. Both limit how far the holster can sit out from your belt or body, and USPSA sets that limit by division. Measure your setup against the rulebook for the match and division you shoot before gear check.\u003c\/p\u003e\u003cp\u003eThe open, tapered muzzle clears threaded barrels and compensators. Cut to accept slide-mounted optics and suppressor height sights.\u003c\/p\u003e\u003cp\u003eRight-hand draw. Holster shell in Black or Carbon Fiber, Quick Mount attachment in black. Lifetime warranty against cracks and defects. Free US shipping, same-day dispatch on orders placed before 2 PM EST.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCompatible Model(s):\u003c\/strong\u003e\u003cspan\u003e Canik TP9SFX with the SureFire X300U-A\/B\u003c\/span\u003e\u003c\/p\u003e","brand":"Black Scorpion Outdoor Gear","offers":[{"title":"Right-Hand Draw \/ Black","offer_id":45331154108459,"sku":"HC36-QMX300BK-TP9SFX","price":174.99,"currency_code":"USD","in_stock":true},{"title":"Right-Hand Draw \/ Carbon Fiber","offer_id":45331154141227,"sku":"HC36-QMX300CF-TP9SFX","price":179.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0122\/5696\/8763\/files\/BSG_Level_II_New_Strap_QMH_1.jpg?v=1789137812"},{"product_id":"cz-p-09-c-x300-level-2-tactical-quick-mount-holster","title":"CZ P-09 C w\/ SureFire X300U-A\/B Level 2 Tactical Quick Mount Holster","description":"\u003cp\u003eBuilt for shooters who move. This is the 0.093'' Level II Tactical shell on our Quick Mount belt attachment. The holster rides on your belt and comes off the attachment with the push of a button, no tools needed.\u003c\/p\u003e\u003cp\u003eRetention is a spring-loaded Level II hood. Press the button on the side of the hood and it travels forward, clear of the slide, and the pistol comes straight up. It resets on the reholster. The button sits under your thumb, not your trigger finger.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThicker shell, set once\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe shell is 0.093'' Kydex, a full gauge step up from the 0.080'' most holsters are cut from. It holds its shape better under a hard draw.\u003c\/p\u003e\u003cp\u003eThe retention hardware is riveted, not screwed. Retention is set at the bench and it stays there. Nothing to back out on a stage, nothing to lose in the bottom of a range bag. Retention is not adjustable on this build, which is the point: it is set once and it does not move.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQuick Mount attachment\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe belt attachment is machined from anodized aluminum and comes in black. It fits 1.5'' belts.\u003c\/p\u003e\u003cp\u003ePush the Quick Mount release button to take the holster off the attachment. The attachment stays on your belt, so the holster comes off and goes back on without taking your belt off.\u003c\/p\u003e\u003cp\u003eThe holster body is riveted, so there is nothing on it to loosen. Check that the belt attachment hardware is tight before you run it hard.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it's legal\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eUSPSA Multigun rules allow a holster on a belt worn at waist level, and rule 5.2.1.3.1 requires it to retain the pistol during the vigorous movement that may be required during the courses of fire. That is what the Level II hood is for. The Tactical Games allows hip-level holsters, and bans appendix, small of back, fanny pack, and shoulder rigs.\u003c\/p\u003e\u003cp\u003eUSPSA and IDPA pistol matches are stricter. Both limit how far the holster can sit out from your belt or body, and USPSA sets that limit by division. Measure your setup against the rulebook for the match and division you shoot before gear check.\u003c\/p\u003e\u003cp\u003eThe open, tapered muzzle clears threaded barrels and compensators. Cut to accept slide-mounted optics and suppressor height sights.\u003c\/p\u003e\u003cp\u003eRight-hand draw. Holster shell in Black or Carbon Fiber, Quick Mount attachment in black. Lifetime warranty against cracks and defects. Free US shipping, same-day dispatch on orders placed before 2 PM EST.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCompatible Model(s):\u003c\/strong\u003e\u003cspan\u003e CZ P-09 C with the SureFire X300U-A\/B\u003c\/span\u003e\u003c\/p\u003e","brand":"Black Scorpion Outdoor Gear","offers":[{"title":"Right-Hand Draw \/ Black","offer_id":45331154239531,"sku":"HC36-QMX300BK-P09C","price":174.99,"currency_code":"USD","in_stock":true},{"title":"Right-Hand Draw \/ Carbon Fiber","offer_id":45331154272299,"sku":"HC36-QMX300CF-P09C","price":179.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0122\/5696\/8763\/files\/BSG_Level_II_New_Strap_QMH_1.jpg?v=1789137812"},{"product_id":"cz-p-10-c-x300-level-2-tactical-quick-mount-holster","title":"CZ P-10 C w\/ SureFire X300U-A\/B Level 2 Tactical Quick Mount Holster","description":"\u003cp\u003eBuilt for shooters who move. This is the 0.093'' Level II Tactical shell on our Quick Mount belt attachment. The holster rides on your belt and comes off the attachment with the push of a button, no tools needed.\u003c\/p\u003e\u003cp\u003eRetention is a spring-loaded Level II hood. Press the button on the side of the hood and it travels forward, clear of the slide, and the pistol comes straight up. It resets on the reholster. The button sits under your thumb, not your trigger finger.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThicker shell, set once\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe shell is 0.093'' Kydex, a full gauge step up from the 0.080'' most holsters are cut from. It holds its shape better under a hard draw.\u003c\/p\u003e\u003cp\u003eThe retention hardware is riveted, not screwed. Retention is set at the bench and it stays there. Nothing to back out on a stage, nothing to lose in the bottom of a range bag. Retention is not adjustable on this build, which is the point: it is set once and it does not move.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQuick Mount attachment\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe belt attachment is machined from anodized aluminum and comes in black. It fits 1.5'' belts.\u003c\/p\u003e\u003cp\u003ePush the Quick Mount release button to take the holster off the attachment. The attachment stays on your belt, so the holster comes off and goes back on without taking your belt off.\u003c\/p\u003e\u003cp\u003eThe holster body is riveted, so there is nothing on it to loosen. Check that the belt attachment hardware is tight before you run it hard.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it's legal\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eUSPSA Multigun rules allow a holster on a belt worn at waist level, and rule 5.2.1.3.1 requires it to retain the pistol during the vigorous movement that may be required during the courses of fire. That is what the Level II hood is for. The Tactical Games allows hip-level holsters, and bans appendix, small of back, fanny pack, and shoulder rigs.\u003c\/p\u003e\u003cp\u003eUSPSA and IDPA pistol matches are stricter. Both limit how far the holster can sit out from your belt or body, and USPSA sets that limit by division. Measure your setup against the rulebook for the match and division you shoot before gear check.\u003c\/p\u003e\u003cp\u003eThe open, tapered muzzle clears threaded barrels and compensators. Cut to accept slide-mounted optics and suppressor height sights.\u003c\/p\u003e\u003cp\u003eRight-hand draw. Holster shell in Black or Carbon Fiber, Quick Mount attachment in black. Lifetime warranty against cracks and defects. Free US shipping, same-day dispatch on orders placed before 2 PM EST.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCompatible Model(s):\u003c\/strong\u003e\u003cspan\u003e CZ P-10 C with the SureFire X300U-A\/B\u003c\/span\u003e\u003c\/p\u003e","brand":"Black Scorpion Outdoor Gear","offers":[{"title":"Right-Hand Draw \/ Black","offer_id":45331154370603,"sku":"HC36-QMX300BK-P10C","price":174.99,"currency_code":"USD","in_stock":true},{"title":"Right-Hand Draw \/ Carbon Fiber","offer_id":45331154403371,"sku":"HC36-QMX300CF-P10C","price":179.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0122\/5696\/8763\/files\/BSG_Level_II_New_Strap_QMH_1.jpg?v=1789137812"},{"product_id":"cz-p-10-f-x300-level-2-tactical-quick-mount-holster","title":"CZ P-10 F w\/ SureFire X300U-A\/B Level 2 Tactical Quick Mount Holster","description":"\u003cp\u003eBuilt for shooters who move. This is the 0.093'' Level II Tactical shell on our Quick Mount belt attachment. The holster rides on your belt and comes off the attachment with the push of a button, no tools needed.\u003c\/p\u003e\u003cp\u003eRetention is a spring-loaded Level II hood. Press the button on the side of the hood and it travels forward, clear of the slide, and the pistol comes straight up. It resets on the reholster. The button sits under your thumb, not your trigger finger.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThicker shell, set once\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe shell is 0.093'' Kydex, a full gauge step up from the 0.080'' most holsters are cut from. It holds its shape better under a hard draw.\u003c\/p\u003e\u003cp\u003eThe retention hardware is riveted, not screwed. Retention is set at the bench and it stays there. Nothing to back out on a stage, nothing to lose in the bottom of a range bag. Retention is not adjustable on this build, which is the point: it is set once and it does not move.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQuick Mount attachment\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe belt attachment is machined from anodized aluminum and comes in black. It fits 1.5'' belts.\u003c\/p\u003e\u003cp\u003ePush the Quick Mount release button to take the holster off the attachment. The attachment stays on your belt, so the holster comes off and goes back on without taking your belt off.\u003c\/p\u003e\u003cp\u003eThe holster body is riveted, so there is nothing on it to loosen. Check that the belt attachment hardware is tight before you run it hard.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it's legal\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eUSPSA Multigun rules allow a holster on a belt worn at waist level, and rule 5.2.1.3.1 requires it to retain the pistol during the vigorous movement that may be required during the courses of fire. That is what the Level II hood is for. The Tactical Games allows hip-level holsters, and bans appendix, small of back, fanny pack, and shoulder rigs.\u003c\/p\u003e\u003cp\u003eUSPSA and IDPA pistol matches are stricter. Both limit how far the holster can sit out from your belt or body, and USPSA sets that limit by division. Measure your setup against the rulebook for the match and division you shoot before gear check.\u003c\/p\u003e\u003cp\u003eThe open, tapered muzzle clears threaded barrels and compensators. Cut to accept slide-mounted optics and suppressor height sights.\u003c\/p\u003e\u003cp\u003eRight-hand draw. Holster shell in Black or Carbon Fiber, Quick Mount attachment in black. Lifetime warranty against cracks and defects. Free US shipping, same-day dispatch on orders placed before 2 PM EST.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCompatible Model(s):\u003c\/strong\u003e\u003cspan\u003e CZ P-10 F with the SureFire X300U-A\/B\u003c\/span\u003e\u003c\/p\u003e","brand":"Black Scorpion Outdoor Gear","offers":[{"title":"Right-Hand Draw \/ Black","offer_id":45331154599979,"sku":"HC36-QMX300BK-P10F","price":174.99,"currency_code":"USD","in_stock":true},{"title":"Right-Hand Draw \/ Carbon Fiber","offer_id":45331154632747,"sku":"HC36-QMX300CF-P10F","price":179.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0122\/5696\/8763\/files\/BSG_Level_II_New_Strap_QMH_1.jpg?v=1789137812"},{"product_id":"cz-shadow-2-x300-level-2-tactical-quick-mount-holster","title":"CZ Shadow 2 w\/ SureFire X300U-A\/B Level 2 Tactical Quick Mount Holster","description":"\u003cp\u003eBuilt for shooters who move. This is the 0.093'' Level II Tactical shell on our Quick Mount belt attachment. The holster rides on your belt and comes off the attachment with the push of a button, no tools needed.\u003c\/p\u003e\u003cp\u003eRetention is a spring-loaded Level II hood. Press the button on the side of the hood and it travels forward, clear of the slide, and the pistol comes straight up. It resets on the reholster. The button sits under your thumb, not your trigger finger.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThicker shell, set once\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe shell is 0.093'' Kydex, a full gauge step up from the 0.080'' most holsters are cut from. It holds its shape better under a hard draw.\u003c\/p\u003e\u003cp\u003eThe retention hardware is riveted, not screwed. Retention is set at the bench and it stays there. Nothing to back out on a stage, nothing to lose in the bottom of a range bag. Retention is not adjustable on this build, which is the point: it is set once and it does not move.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQuick Mount attachment\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe belt attachment is machined from anodized aluminum and comes in black. It fits 1.5'' belts.\u003c\/p\u003e\u003cp\u003ePush the Quick Mount release button to take the holster off the attachment. The attachment stays on your belt, so the holster comes off and goes back on without taking your belt off.\u003c\/p\u003e\u003cp\u003eThe holster body is riveted, so there is nothing on it to loosen. Check that the belt attachment hardware is tight before you run it hard.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it's legal\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eUSPSA Multigun rules allow a holster on a belt worn at waist level, and rule 5.2.1.3.1 requires it to retain the pistol during the vigorous movement that may be required during the courses of fire. That is what the Level II hood is for. The Tactical Games allows hip-level holsters, and bans appendix, small of back, fanny pack, and shoulder rigs.\u003c\/p\u003e\u003cp\u003eUSPSA and IDPA pistol matches are stricter. Both limit how far the holster can sit out from your belt or body, and USPSA sets that limit by division. Measure your setup against the rulebook for the match and division you shoot before gear check.\u003c\/p\u003e\u003cp\u003eThe open, tapered muzzle clears threaded barrels and compensators. Cut to accept slide-mounted optics and suppressor height sights.\u003c\/p\u003e\u003cp\u003eRight-hand draw. Holster shell in Black or Carbon Fiber, Quick Mount attachment in black. Lifetime warranty against cracks and defects. Free US shipping, same-day dispatch on orders placed before 2 PM EST.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCompatible Model(s):\u003c\/strong\u003e\u003cspan\u003e CZ Shadow 2 with the SureFire X300U-A\/B\u003c\/span\u003e\u003c\/p\u003e","brand":"Black Scorpion Outdoor Gear","offers":[{"title":"Right-Hand Draw \/ Black","offer_id":45331154665515,"sku":"HC36-QMX300BK-SHADOW2","price":174.99,"currency_code":"USD","in_stock":true},{"title":"Right-Hand Draw \/ Carbon Fiber","offer_id":45331154698283,"sku":"HC36-QMX300CF-SHADOW2","price":179.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0122\/5696\/8763\/files\/BSG_Level_II_New_Strap_QMH_1.jpg?v=1789137812"},{"product_id":"fn-fnx-45-tactical-x300-level-2-tactical-quick-mount-holster","title":"FN FNX-45 Tactical w\/ SureFire X300U-A\/B Level 2 Tactical Quick Mount Holster","description":"\u003cp\u003eBuilt for shooters who move. This is the 0.093'' Level II Tactical shell on our Quick Mount belt attachment. The holster rides on your belt and comes off the attachment with the push of a button, no tools needed.\u003c\/p\u003e\u003cp\u003eRetention is a spring-loaded Level II hood. Press the button on the side of the hood and it travels forward, clear of the slide, and the pistol comes straight up. It resets on the reholster. The button sits under your thumb, not your trigger finger.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThicker shell, set once\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe shell is 0.093'' Kydex, a full gauge step up from the 0.080'' most holsters are cut from. It holds its shape better under a hard draw.\u003c\/p\u003e\u003cp\u003eThe retention hardware is riveted, not screwed. Retention is set at the bench and it stays there. Nothing to back out on a stage, nothing to lose in the bottom of a range bag. Retention is not adjustable on this build, which is the point: it is set once and it does not move.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQuick Mount attachment\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe belt attachment is machined from anodized aluminum and comes in black. It fits 1.5'' belts.\u003c\/p\u003e\u003cp\u003ePush the Quick Mount release button to take the holster off the attachment. The attachment stays on your belt, so the holster comes off and goes back on without taking your belt off.\u003c\/p\u003e\u003cp\u003eThe holster body is riveted, so there is nothing on it to loosen. Check that the belt attachment hardware is tight before you run it hard.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it's legal\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eUSPSA Multigun rules allow a holster on a belt worn at waist level, and rule 5.2.1.3.1 requires it to retain the pistol during the vigorous movement that may be required during the courses of fire. That is what the Level II hood is for. The Tactical Games allows hip-level holsters, and bans appendix, small of back, fanny pack, and shoulder rigs.\u003c\/p\u003e\u003cp\u003eUSPSA and IDPA pistol matches are stricter. Both limit how far the holster can sit out from your belt or body, and USPSA sets that limit by division. Measure your setup against the rulebook for the match and division you shoot before gear check.\u003c\/p\u003e\u003cp\u003eThe open, tapered muzzle clears threaded barrels and compensators. Cut to accept slide-mounted optics and suppressor height sights.\u003c\/p\u003e\u003cp\u003eRight-hand draw. Holster shell in Black or Carbon Fiber, Quick Mount attachment in black. Lifetime warranty against cracks and defects. Free US shipping, same-day dispatch on orders placed before 2 PM EST.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCompatible Model(s):\u003c\/strong\u003e\u003cspan\u003e FN FNX-45 Tactical with the SureFire X300U-A\/B\u003c\/span\u003e\u003c\/p\u003e","brand":"Black Scorpion Outdoor Gear","offers":[{"title":"Right-Hand Draw \/ Black","offer_id":45331154763819,"sku":"HC36-QMX300BK-FNX45","price":174.99,"currency_code":"USD","in_stock":true},{"title":"Right-Hand Draw \/ Carbon Fiber","offer_id":45331154796587,"sku":"HC36-QMX300CF-FNX45","price":179.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0122\/5696\/8763\/files\/BSG_Level_II_New_Strap_QMH_1.jpg?v=1789137812"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0122\/5696\/8763\/collections\/Steel-Targets_b46daf2b-b13d-4709-a91d-5d2726fe3ba9.jpg?v=1789139848","url":"https:\/\/www.blackscorpiongear.com\/collections\/level-2-quick-mount-holsters.oembed?page=2","provider":"Black Scorpion Outdoor Gear","version":"1.0","type":"link"}