QUESTION: Which belt can I use with this mag pouch?

This magazine pouch is compatible with belts up to 1.5''. You can pair it perfectly with our Pro HD Competition Belt

QUESTION: Will this mag pouch work with double stack .45 magazines?

No. The magazine pouch will work with 9mm and .40 double stack magazines but the double stack .45s are a bit too wide and will not fit. However, you can use single stack .45 magazines.

QUESTION: How do I mount the magazine pouch to the belt?

First, loosen the 5mm Allen screw that holds the mag pouch to the belt attachment so that you are able to rotate it and provide easy access to the rear plate screws. The (4) rear plate screws can be removed with a 2mm Allen key (not provided).

QUESTION: How do I adjust the angle, pivot, and height of the magazine pouch?

Loosen the 5mm Allen screw located on the middle of the magazine pouch and proceed to adjust the angle, pivot, and height. Note: Once you've found the perfect spot for the magazine pouch, we recommend adding a drop of blue thread locker.

QUESTION: How do I convert from double stack to single stack?

Start by fully unscrewing and removing the manual retention knob. Proceed to remove the bottom retention screw with a 2mm Allen key and replace the plastic spacers with the smaller tabs provided with your purchase.

QUESTION: How do I convert to right-hand draw? - Left/handed shooters.

*Video tutorial coming soon