Beretta APX A1 Full Size Champagne Series Limited Edition Competition Rig
Free US shipping. Same-day dispatch before 2 PM EST.
A Champagne Series competition rig for the Beretta APX A1 Full Size, set up for IPSC and USPSA: a Pro Heavy Duty Competition Holster, a two-piece Pro Heavy Duty Belt, three ambidextrous mag pouches and a magnetic mag carrier. Right-hand draw only.
The champagne finish is on the holster's belt attachment and on the three mag pouch face plates.
What's included
- (1) Pro Heavy Duty Competition Holster for the Beretta APX A1 Full Size, in Black or Carbon Fiber (your pick), with a champagne finish belt attachment and an adjustment tool (3mm Allen and Phillips head)
- (1) Pro Heavy Duty Competition Belt: inner belt, outer belt and belt keeper
- (3) Ambidextrous Single/Double Stack Competition Magazine Pouches with champagne finish face plates, each with a bag of thinner spacers for single stack 1911 magazines
- (1) Universal Magnetic Magazine Carrier, 1.5'' Slot Mount, with an adhesive hook and loop patch
The belt and magnetic carrier come in black only.
Holster
A 0.08'' Kydex shell molded for the Beretta APX A1 Full Size. Optics ready. Two thumb screws on the shell set the retention by hand, no tools needed.
A spacer block on the back of the shell sets the holster's offset from your body and holds the belt attachment. Loosen the two 3mm Allen screws on the back of the belt attachment to set the ride height and angle, then tighten them again.
The aluminum belt attachment clamps onto the belt with two metal tabs. It fits 1.5'' belts at least 6mm thick, so it holds tight on the 9mm outer belt in this rig. The included tool covers every screw on the holster.
Belt
A two-piece hook and loop belt, 1.5'' wide. The 5mm inner belt stays in your pant loops. The 9mm outer belt carries your gear and locks onto the inner belt.
Belt sizes go by your waist measurement, not your pant size. Check the Size guide before you order.
Magazine pouches
Each pouch fits 9mm and .40 S&W double stack magazines, and .45 ACP single stack magazines with the included spacers. It has 360 degree cant and pivot, 2'' of ride height adjustment, and two screws to set how tightly it holds the magazine.
The pouches ship set up for double stack magazines. Single stack setup is covered in the Setup instructions.
Magnetic mag carrier
A 42mm N52 magnet with over 30 lbs of hold. The 7mm belt attachment is a tight fit on the 9mm outer belt on purpose, so the carrier stays put once it's on.
Made for IPSC and USPSA competition.
The holster, mag pouches and magnetic carrier are made in the USA. The belt is made in Taiwan.
Measure your waist where you'll wear the belt. Run a soft tape measure around your body over your pants, snug but not tight.
Add 9'' to that number. The extra 9'' is the overlap, where the outer belt's hook and loop grips the inner belt. With less than 9'' of contact the belt won't hold securely.
Pick the size whose overall length is equal to or just longer than your total. Example: a 36'' waist plus 9'' is 45'', so you need a Large (46.5'').
- Small: 38.5'' (97.8 cm) overall, fits a waist up to 29.5'' (75 cm)
- Medium: 43'' (109.2 cm) overall, fits a waist up to 34'' (86.4 cm)
- Large: 46.5'' (118.1 cm) overall, fits a waist up to 37.5'' (95.3 cm)
- X-Large: 50'' (127 cm) overall, fits a waist up to 41'' (104.1 cm)
- XX-Large: 54'' (137.2 cm) overall, fits a waist up to 45'' (114.3 cm)
Between two sizes? Go up. Extra overlap means more hook and loop contact, which holds better. A belt that's too short won't stay closed.
- Flip the inner belt. It ships inside out. Turn it so the fuzzy side faces out, then thread it through your pant loops. If the fuzzy side faces in, the outer belt has nothing to grip.
- Set up the mag pouches before they go on the belt. They ship set up for double stack magazines. For single stack 1911 magazines, take out the thumb screw (top right, by hand) and the retention screw (bottom left, 2mm Allen key), swap in the thinner spacers from the included bag, and put both screws back in.
- Mount the magnetic carrier first. Start at the tapered end of the outer belt. Press the carrier on and wiggle it side to side as you work it along the belt. The fit is tight on purpose so it won't move once it's in place. Then peel the backing off the hook and loop patch and stick it on the back of the carrier's belt attachment. The carrier has no screws to clamp it to the belt, so the patch grips the inner belt and holds it steady.
- Mount the mag pouches. Loosen the 5mm Allen screw on the pouch (it sets the ride height and angle) so you can reach the four 2mm screws on the belt attachment. Loosen the four 2mm screws to open up the attachment, fit it on the belt, and tighten them back down.
- Mount the holster. With the Phillips end of the included tool, take the two metal tabs off the holster's belt attachment. Place the attachment on the outer belt, put both tabs back on and tighten them so the attachment clamps the belt. The belt has to be at least 6mm thick for the attachment to hold without moving (the outer belt in this rig is 9mm).
- Layout. Put the holster on your right hip. Put the magnetic carrier up front on the left side, with the three mag pouches lined up behind it. Check your division's equipment rules before a match.
- Adjust the holster. With an unloaded pistol, loosen the two 3mm Allen screws on the back of the belt attachment (Allen end of the included tool), set the ride height and angle, and tighten them again. Then set the retention with the two thumb screws on the shell, by hand. Tighter holds the pistol more securely while you move. Looser lets it draw with less effort.
- Adjust the mag pouches. Set each pouch's angle and ride height, then tighten the 5mm screw. Then set how tightly each pouch holds the magazine with its two retention screws: turn the top thumb screw by hand, and the bottom screw with a 2mm Allen key.
- Lock the screws. Once everything is where you want it, put a drop of removable (medium strength) thread locker on the mag pouch screws and on the holster's screws: the two tab screws that clamp it to the belt, the two 3mm Allen screws that hold the ride height and angle, and the two Phillips screws that hold the spacer block to the shell. Don't use a permanent thread locker, because it can seize the screws so they won't come out. Check every screw before you shoot.
- Put it on. Wrap the outer belt over the inner belt and press it down so the hook and loop lock together. Close the end with the belt keeper.
Tools
The holster comes with its own tool, with a 3mm Allen head and a Phillips head. It covers every screw on the holster.
For the mag pouches you'll need (not included):
- 5mm Allen key: angle and ride height screw
- 2mm Allen key: belt attachment screws and bottom retention screw
- Removable (medium strength) thread locker, for the pouches and the holster
Choose options
Champagne Series - Limited Edition Rig Features:
The Pro Heavy Duty Competition Belt effortlessly assembles using a user-friendly hook and loop system, simplifying the process of mounting and dismounting. Click here to learn more
The Ambi Single/Double Stack Mag Pouch is compatible with 9mm and .40 Cal magazines, offering full adjustability for ride-height, pivot, and angle.Click here to learn more
The Pro Heavy Duty Competition Holster features an anodized aluminum belt attachment with a 15mm spacer for a perfect 90-degree angle. Compatible with 1.5'' belts, it offers thumb screws for retention, angle, and ride-height adjustments, all within IPSC and USPSA rules. The 0.08'' Kydex shell is precision-molded for the advertised firearm. Click here to learn more
The Competition Magnetic Magazine Holder is the ultimate accessory for any shooter who wants to ace the stage. Whether you start with an unloaded weapon or need to reload on the go, this magnetic pouch lets you grab your magazine with ease and speed. Click here to learn more
Exclusivity and Style
Stand out on the range with this limited edition rig, offering a unique blend of elegance and performance.
Enhanced Performance
Engineered for competitive shooting, this set provides optimal functionality, allowing you to focus on your performance and looking good while doing it.
Outstanding Products and Exceptional Customer Service!
I’ve had an absolutely outstanding experience with Black Scorpion Outdoor Gear. The quality, fit, finish, and attention to detail of their competition equipment are excellent. From the competition belt and holster to the magazine pouches and accessories, everything feels solid, well engineered, and designed with serious shooters in mind.
What really sets Black Scorpion apart, however, is their customer service. Patrick and the manager went above and beyond to help me with my setup. They were knowledgeable, patient, professional, and genuinely interested in making sure everything was configured correctly for my needs. Their level of personal attention is becoming increasingly difficult to find.
I especially appreciated that they didn’t simply sell me equipment—they took the time to help me understand the different components, compatibility, positioning, and overall setup. You can immediately tell that these are people who know their products and stand behind them.
After putting together my complete Black Scorpion competition rig, I’m extremely impressed with both the appearance and quality. The equipment looks fantastic, feels extremely sturdy, and the adjustability allows for a very clean and personalized setup.
Patrick deserves special recognition for his exceptional service, and the manager reinforced that same commitment to customer satisfaction. This is exactly how a premium company should treat its customers.
Without hesitation, 5 stars for Black Scorpion Outdoor Gear. Excellent products, excellent craftsmanship, and truly exceptional service. I will absolutely continue doing business with them and highly recommend them to anyone looking for quality competition shooting gear.
⭐⭐⭐⭐⭐ Highly recommended!
looks nice, feels nice, and fits perfectly for the TS3
I picked up the belt combo kit they had with 3 mag pouches, a magnet, holster, inner and outter belt. It is fantastic, I bought the mete mc9 prime holster hoping it would fit my prime radian and fits perfect. Zero complaints. Mag changes are quick, draws are fast, excellent gear will definitely buy more as I buy more guns.
Love the whole rig the magnet is a game changer i will never have a belt without one again.
I love the belt but came with a missing screw on the holster.
Holster is great, mag holders are perfect. Just wish the included magnet fit the belt. I can't get it to slide on and prefer not to use the included Velcro.
Everything was easy to setup and slide onto the belt. Easy hand adjustable screws to adjust retention on the mags and pistol. Only issue I have is the mag pouch rotates a little easy and you have to take the faceplate off to tighten. This more an operator error on my part than a problem with the gear.
When my TP9SFx Champagne competition rig arrived, I will and remain thrilled. The quality and design confirmed I made a sound purchase decision. Due to my inexperience, I ran into some minor difficulties with my initial set-up. A quick email helped sort out my issues. A long time friend is entering into the world of Action Pistol Competition as well. I have already recommended he check out my new Black Scorpion gear at our next range practice session.
This is a beautiful set up. My Legion fits perfect. I love all the adjustability on the mag pouches and holster. Also as a bonus, the ACE VR legion handset fit in the holster as well.
Excellent product, the finish and functionality are superb. My only advice is that first-time buyers should order a larger size because mine was very tight. I didn't have extra length like I saw in the videos; I thought that was normal at the time. So, order a size larger than your exact waist measurement.
This belt is not only perfect for USPSA matches, but very cool looking. It's great!
This outside belt is sturdy to handle my weapon and 3 magazines. I haven't attached the magnet yet. But, I'm very satisfied with everything else.
I've bought many holsters and when I purchased the "competition" setup I assumed the holster would be much better fitting. It's way too tight, the top of the holster narrows in too much therefore reholstering the pistolbis difficult and removing the pistol is just as difficult. I removed your holster and used a basic kydex in its place. Everything else I'm happy with, the holster not at all.
Very nice competition belt and holster. Quality is superior! Delivery was super fast! One very satisfied customer here! Thank you!
Warranty Details
At Black Scorpion Outdoor Gear, we are committed to the quality and durability of our products, which is why we offer a Lifetime Warranty. If your holster or magazine carrier ever cracks or breaks, discontinue use and reach out to us right away. Our dedicated Customer Service Team will quickly repair or replace your gear, ensuring you’re always ready for action.