CZ Shadow 2 w/ Streamlight TLR-1 HL Pro Competition Holster

Mag holders are very adjustable and well designed.

Perfect fit for the Rival with the Align Tactical thumb rest. Can’t wait for BSG to make a holster for the TTI
platform.

I already has one of these for my cz sp-01 so I knew what I was getting. I have done quite a bit of work on my 34 so I can runi it in uspsa open which means that I had to modify this holster a bit. If I didn't have a compensator of extended mag release it would have been perfect but I knew what material I was getting so i was able to cut away where I needed with a dremmel. Otherwise it is excellent as far as the ability to adjust draw hight and angle. It also stays put on the belt.

Got an email , telling me that i could ask for extra spacers in my next order as a note in future orders , which i'm definitely doing for my dad. Highly recommend ordering extra spacers if you want a good fit.

I ordered a competition holster for my Cz S2 , in my case i'm from mexico so my S2 is .380 which is literally the same as the 9mm on the outside (you can look it up at the CZ website). I keep reading reviews that say retention screws fall off. Yes they will fall off, other gun holsters in your guys website use 2 screw retentions, but you ship 1 screw retention in the S2 holster. So i would recommend for a better fit to the S2 9mm or .380 and happier customers , you should ship 2 pairs of screw retentions . Btw i fixed my issue with a plastic wall screw hanger and shot my first IPSC match, the screws held like if it was meant to be that way. Other than that, i recommend it 100% , good quality.

Overall, I'm extremely impressed with the quality: the Kydex molding is perfect, the fit is excellent, and the draw is smooth. It's a fantastic product.
However, I've identified a small area for potential improvement regarding the retention screws.
I noticed that after setting the desired retention, the screws tend to loosen over time due to normal movement and vibration. I see that you use rubber bushings between the Kydex halves — which is the correct engineering approach — but for a wide-bodied pistol like the Canik TTI Combat, the supplied bushings seem to be too short.
They compress fully very quickly, setting a minimum gap but failing to provide enough constant spring tension on the screw threads to prevent them from backing out.
As a temporary fix, I've applied blue threadlocker, which has solved the issue. However, a more elegant and user-friendly solution would be to include slightly longer rubber bushings (perhaps 1-2mm longer) specifically for your double-stack pistol holsters. This would allow for a much wider range of adjustable tension while ensuring the screws remain secure without the need for threadlocker.
I hope this detailed feedback is helpful. Again, it's a superb holster, and this small tweak could make it absolutely perfect.

This holster is just what I needed, and fits the m&p 2.0 competitor like a glove .

1911 5'' Pro Competition Holster